Cart is Empty

View

Related Products

Check items to add to the cart or select all

Eastwood Digital Torque Wrenches and Adaptors

Eastwood Pneumatic Tools - Impact Wrench, Metal Sheers, Metal Saw

Recently Viewed Items

Compact Infrared Non-Contact Thermometer 522deg
Item #11476
Pneumatic Paint Shaker
Item #19426
Pneumatic 3" Sander & Polishing Kit
Item #12815

Community Poll

ABOUT SSL CERTIFICATES

Home /
POR-15 Black Rust Paint Quart

POR-15 Black Rust Paint Quart

Enlarge product image

POR-15 Black Rust Paint Quart

Item #13585 ZP

In Stock - Ready to Ship Today

Only $46.99

Now Only $42.29

POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be top coated for prolonged exposure to sunlight. Top coating is not required for areas not exposed to sunlight.

5 Review(s) | Add Your Review

Add Items to Cart Qty:

About POR-15 Black Rust Paint Quart

POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be top coated for prolonged exposure to sunlight.Top coating is not required for areas not exposed to sunlight.

16 FL OZ

POR-15 Metal Ready
POR-15 Marine Clean
respirator
Gloves
Eastwood Rust Encapsulator
Eastwood Rust Converter
Eastwood Chassis Black
Eastwood Underhood Black

One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings

always wear eye, skin and respiratory protection always use in a well ventilated area away from an open flame consult MSDS for specific safety warnings

Click Here for Material Safety Data Sheet

Click here to view product information sheet

See this product in action!

Customer Reviews

(Posted on 4/7/12) POR-15 Great Product
Review by Dennis

Price
Value
Quality

The more I use POR-15 the more I like it. I use it on trailer frames from tongues to bumpers. It works great on wood. I use it to seal marine plywood edges and any holes. This is the most self leveling/thin paint I have used. A small amount goes a long way. Wear Protection. Get disposable gloves and long sleeve shirt. If you get this stuff on you or almost anything else and don't get it off immediately, you will have to wear it for a week or so. It bonds to your skin like no other product I have ever used. This is not like any other paint. You must read and follow the directions completely. Great stuff.

(Posted on 3/29/12) Awsome product
Review by Mark

Quality
Price
Value

Used for a 1965 mustang rebuild worked good on bare repair panels and rusted ares. If this product did not work for someone it was appied wrong surface prep is important,,must use marine clean to degrease and clean area to be painted.Also have used to repaint tandem dump trailer that gets USED. Finish is rock hard and stays,does not scratch and chip like other products I have tried

(Posted on 3/9/12) Good Product
Review by Mickey

Price
Value
Quality

I have used this product several times.. I feel it works very well.. The last project was on my 2005 F-150 underside where one piece of metal was attached to another,, some rust was forming at these seams.. I brushed it into these areas and the product overlapped onto a factory painted surface and it is still holding very well..
I have used it on rusty surfaces and some bare metal areas on the same projects and noticed the bare metal area would maybe not cover totally on the first coat.. After a day to dry I would coat again with a second coat and it looked very good and seems to hold up to the harsh elements of the road spray (underside of two car trailers)...... Yes it does dry a little slow,, but overnight and it's ready to use or recoat..... Overall I still like the product,, POR-15..........

(Posted on 1/24/12) Good Product
Review by Sparg

Quality
Price
Value

As Steve indicated, he did not use the product correctly. Please read the directions, POR is not designed to adhere to bare metal.

I used POR on my rusty underbody and it adhered perfectly and is hard as a rock.

If you're working on a resto project where it needs to be perfect, POR is not your product. This is for vehicles that have some rust and you want to seal it up to protect it from the environment and further corrosion.

(Posted on 1/23/12) Warning
Review by Steve

Quality
Price
Value

Cleaned 1957 Chevy Nomad to bare steel and painted on. Got streaks, bubbles and still hasn't dried after one day. Would use this product on something covered with rust trying to flip real quick. My problem will be removing this from my current project. My regret is not trying the recommended test spot. This product is like tar and I don't recommend for a real restoration project.