• Home
  • POR-15 Semi Gloss Black Gallon

    POR-15 Semi Gloss Black Gallon

    Item #13589ZP

    "Paint Over Rust" paint in semi-gloss black

    Details

    POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be top coated for prolonged exposure to sunlight. Top coating is not required for areas not exposed to sunlight.

    More info...

    About POR-15 Semi Gloss Black Gallon

    POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be topcoated for prolonged exposure to sunlight. Topcoating is not required for areas not exposed to sunlight.


    Contents

    128 FL OZ


    Accessories

    POR-15 Metal Ready POR-15 Marine Clean respirator Gloves Eastwood Rust Encapsulator Eastwood Rust Converter Eastwood Chassis Black Eastwood Underhood Black


    Application

    One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


    Safety

    always wear eye, skin and respiratory protection always use in a well ventilated area away from an open flame consult MSDS for specific safety warnings


    Warranty

    MADE IN THE USA


    Application

    One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


    Customers also viewed: