• Home
  • POR-15 Semi Gloss Black Pint
POR-15 Semi Gloss Black Pint is rated 4.4286 out of 5 by 7.
Rated 4 out of 5 by from qrt por15 went on some wet.dirty.rusty spots. bonded nice and solid. on jeep. used it everywhere. but destroyed lid getting it off. and since lid was destroyed it dryed out. i think they need a better lid. not everyone uses all of it in one swig.
Date published: 2015-02-13
Rated 4 out of 5 by from Por15 I bought some of this por 15 it worked great just ran out a little sooner than I thought
Date published: 2014-12-20
Rated 5 out of 5 by from Great Product//Fast Shipping Very good product//goes a long way,,have bought from Eastwood before,and will continue
Date published: 2015-02-02
Rated 4 out of 5 by from Grrrr8 product Awesome product highly recommend POR15. None other works like por15.
Date published: 2013-09-09
Rated 5 out of 5 by from POR-15 Great product, flows out nicely even using a brush.
Date published: 2015-02-09
Rated 5 out of 5 by from Great Stuff I've used a LOT of POR-15 on various projects. Great stuff, and it does exactly what it claims to IF you follow the directions (Imagine that!). As with anything, the prep is the key. This is the first time that I've used it to repair floors- I had some floor pans with rust issues, they were rusting from the inside out and had some pinholes. Passenger side had some really bad damage, but it was localized. I cut out the worst of it, then welded in some small patches. After that, I cleaned it all up, prepped it, and gave it a good coating of POR-15. The areas with the pinhole damage were reinforced with some fiberglass mesh, just like the stuff that comes in the floor pan kit. It did a GREAT job of adding a little strength and bulk to the repair, and it's tough. I certainly wouldn't have done this on a rare car, or a 'concours' restoration, but for a driver like mine, it's more than enough and BETTER than new. While I had the carpet out, I cleaned up and coated the entire floor. The pint size is great, since POR doesn't like to be re-sealed and stored for any amount of time.... If you do close up the can, remember to put some plastic (saran wrap or something similar) between the can and the top, if you ever plan on opening it again!
Date published: 2014-07-15
Rated 4 out of 5 by from awesome Grrr8 product.
Date published: 2013-09-09
  • 2015-03-27T09:39CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_13587Z, PRD, sort_relevancy
  • clientName_eastwood

POR-15 Semi Gloss Black Pint

Item #13587Z

"Paint Over Rust" paint in semi-gloss black

Details

POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be top coated for prolonged exposure to sunlight. Top coating is not required for areas not exposed to sunlight.

More info...

About POR-15 Semi Gloss Black Pint

POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be topcoated for prolonged exposure to sunlight. Topcoating is not required for areas not exposed to sunlight.


Contents

16 FL OZ


Accessories

POR-15 Metal Ready POR-15 Marine Clean respirator Gloves Eastwood Rust Encapsulator Eastwood Rust Converter Eastwood Chassis Black Eastwood Underhood Black


Application

One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


Safety

always wear eye, skin and respiratory protection always use in a well ventilated area away from an open flame consult MSDS for specific safety warnings


Warranty

MADE IN THE USA NSN # NONE


Application

One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


Product Information Sheet

Click here to view product information sheet


Customers also viewed: