• Home
  • POR-15 Super Starter Kit Gloss Black
POR-15 Super Starter Kit Gloss Black is rated 4.5789 out of 5 by 19.
Rated 5 out of 5 by from Quick, simple and easy I've always wanted to try this out, so once I seen this Starter kit available I jump on it. I actually bought three for small projects. Each kit covers anywhere from 4x4 are to 6x6 are, depending on how thick you put it on. I always debated trying the POR-15 product, because I didn't really know what and how much to buy. This starter kit sums it up for you. It's all in the preparation and this stuff works great. Be sure there is no loose rust, and this will stick forever. Even your hands if not carefull!
Date published: 2012-11-02
Rated 5 out of 5 by from Great on rusty floors I used this on my 55 Buick floors that I replaced the carpet on. Kit was the perfect size for my application. Above AND below. Excellent prep makes sure that you get an excellent job. Everything included. Even brushes and gloves.
Date published: 2015-02-11
Rated 1 out of 5 by from Overpromised - Underdelivered I followed the directions TO THE LETTER - cleaned, prepped, cleaned, painted and was happy with results....until it started peeling off less than 2 years later, with rust scale and bubbles underneath it worse than before. This stuff must have acted like a sponge or plastic coating that held in the moisture, because I now have a problem that makes my previous one look like no problem at all. I purchased it from POR-15 directly, so I don't blame Eastwood at all .
Date published: 2011-04-17
Rated 4 out of 5 by from Good product; Not for "show car" quality, but works well A little pricey, but overall it's a great product. It works as says with the proper prep. I used it on my 1987 Samurai which was used off-road only prior to me buying it. That being said, it was in terrible shape and had quite a bit of rust. This product took care of it fairly well and works especially well for a vehicle in bad shape when a perfect "show car" finish isn't desired. I only say that because if you want that kind of finish, you should simply replace the panels affected...
Date published: 2011-06-16
Rated 5 out of 5 by from Excellent I started using POR15 about 8 years ago and my original application is still in perfect condition. Thats 8 winters in Southern Ontario salt and still nothing has come through. If it peels off then you did not prep properly. It is not for new metal and not for over bodywork. All surfaces need to be sandblasted to create a clean rough surface and it requires a second coat as the first becomes tackey. Use it properly and it will last forever.
Date published: 2012-01-23
Rated 5 out of 5 by from Excellent I have been using POR15 for about 8 years and my original application is still in perfect shape. Thats 8 winters in Southern Ontario salt and still nothing has come through. If it peels then you did not prep properly. It is not for new metal or over bodyfillers. My surfaces are always sand blasted to a clean rough surface. A second coat is required when the first coat gets tacky. Do it right and it will last forever.
Date published: 2012-01-23
Rated 5 out of 5 by from Cool Stuff I had no idea this was so solid! This is MUCH thicker than any spray on/paint coating! It is a little messy, so you need to keep brushing over the parts the POR15 might collect in (little pockets etc). Also tape up any holes that the solution may seep into. This stuff dries very hard, so it will be difficult to remove when it is dried. Otherwise, I think it will protect the metal for a long time.
Date published: 2013-05-23
Rated 5 out of 5 by from Great Product! I purchased this kit to paint some spindles and control arms. The process was very easy and the paint went on smooth and glossy. Definitely wear old (throw away) clothes when painting as the paint is hard to get out (or not). The small can was able to paint 4 spindles, 6 control arms and a Steering Rack with a little left over, however I did have to purchase more Metal Prep.
Date published: 2014-12-01
  • 2015-05-05T12:39CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_US, sid_13596ZP, PRD, sort_relevancy
  • clientName_eastwood

can you use por 15 on lead base metals

Asked by: mark2577
Yes, it can be used with lead metals
Answered by: SeanA
Date published: 2014-12-18

Can por 15 be sprayed on item

Asked by: butch1951
Yes, POR 15 can be sprayed onto a surface.
Answered by: MikeL
Date published: 2014-12-18

Can I use this on the body of my car?

Asked by: chris2014
No, POR is not UV resistant
Answered by: SeanA
Date published: 2014-10-22

what is better to use on a truck frame the por15 or encapsulator paint and top coat with a chassis black paint.

Asked by: red16
Unfortunately that is personal preference. Both are just as effective in treating rust and creating a durable hardened coating on a frame. Chassis black is UV resistant where POR is not.
Answered by: SeanA
Date published: 2014-10-17

Is the starter kit available in any other of the standard POR colors?

Asked by: Talus
Unfortunately we only carry the 1 starter kit, in gloss black.
Answered by: SeanA
Date published: 2014-10-10
  • 2015-05-05T13:13CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_13596ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

POR-15 Super Starter Kit Gloss Black

Item #13596ZP Brand: POR-15

Kit lets you try the "Paint Over Rust" system

Details

Want to try POR-15 and to see if you like it? Now you can with the Super Starter Kit. Enough product to clean, etch and paint about 6 square feet, with 2 coats. POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray.

More info...

About POR-15 Super Starter Kit Gloss Black

Want to try POR-15 and to see if you like it? Now you can with the Super Starter Kit. Enough product to clean, etch and paint about 6 square feet, with 2 coats. POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray.


Contents

4 oz of Black POR-15 8 oz of Marine Clean 8oz of Metal Ready Gloves application brush


Accessories

POR-15 Metal Ready POR-15 Marine Clean respirator Gloves Eastwood Rust Encapsulator Eastwood Rust Converter Eastwood Chassis Black Eastwood Underhood Black


Application

This kit covers about 6 square feet at two coats
Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean
Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready
Step 3- Coat surface with POR 15, allow to cure
Step 4 Topcoat with any one of the many Eastwood Paints and coatings


Safety

Always wear eye, skin and respiratory protection always use in a well ventilated area away from an open flame consult MSDS for specific safety warnings.


Warranty

Made in the USA


Application

This kit covers about 6 square feet at two coats Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


Customers also viewed: