• Home
  • SEM Color Coat Flexible Coating Portola Red Interior Paint

SEM Color Coat Flexible Coating Portola Red Interior Paint

Item #11442Z Brand: SEM

UV- and abrasion-resistant enough for vinyl tops; flexible enough for seats

In stock

Only $13.99

Details

Color Coat™ is a specialty flexible coating formulated to restore or change the color of most vinyl surfaces, flexible and rigid plastics, carpet and velour. Color Coat is not a dye, but a fade resistant flexible and permanent coating.

  • OEM Recommended
  • Refinish vehicle interiors and motorcycle seats
  • Enhance automotive carpet and velour
  • Superior adhesion, flexibility, and hiding
  • Will not crack
  • Quick drying and simple to use

Renew or change the color of vinyl, leather, and plastic automotive interior and vinyl tops. Produces a coating that is flexible enough for seats. Abrasion and UV resistant enough for convertible and vinyl tops. Can even be used on carpets to freshen up the existing shade. Colors shown are approximate.


More info...

About SEM Color Coat Flexible Coating Portola Red Interior Paint

Restore or change the color of plastic, vinyl, carpet, and velours. Produces a coating that is flexible enough for seats. Abrasion and UV resistant enough for convertible and vinyl tops. Can even be used on carpets to freshen up the existing shade. This specially formulated elastomeric coating matches many OEM specs for appearance, scuff resistance and overall durability. Each can covers about 6 square feet. For optimum results and adhesion use the (52366Z) Adhesion Promoter Aerosol before applying color. Colors shown are approximate.


Contents

Aerosol net weight 12oz


Specifications

• 16 oz. Aerosol containers
• Coverage: 10 sq. ft.

Suitable Substrates

• Vinyl
• Plastic
• Carpet
• Velour
• Properly prepped and primed metal


Safety

Always wear eye, skin and respiratory protection when painting. Always paint in a well ventilated area away from open flame.


Warranty

Made in USA QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


Application

For best results, use when can is 70°F. Clean surface with warm soap and water. Ensure surface is dry before painting. Hold can approximately 6-8 inches from the surface to be coated. Apply light coats allowing 5-10 minutes between coats. Several thin coats give a better finish than one heavy coat. Carpet and Velour: Spray one light mist coat and immediately brush in all all directions using a nylon bristle brush. Apply a second light mist coat and brush again.


Accessories

52366z Vinyl Adhesion Promoter 52056z Plastic and leather adhesion promoter 52354 5-PC Door Panel tool set 43459 Nylon pry tool set


Customer Reviews

Questions & Answers

Customers also viewed: