• Home
  • ALC Pressure Blaster 150 Pound

I am using your 150 pound sand blaster it is filled with very fine, dry, clean sand and it seems to be getting stuck every few minutes of use. I have about 120PSI feeding the pressure side. The nozzle is like new and I strained the sand. 

Asked by: Sargene
We do not recommend using sand in any media blasters, as it is harmful to your health. In regards to your issue, there are several things that need to be checked when blasters do not flow media consistently. 1 - Does your compressor meet the minimum CFM requirements for the blaster? 2 - Assuming #1 is yes, is your air supply clean and dry? It is critical to have clean dry air, as moisture can clump the media. 3 - Has the media been sifted before loading into the machine. There can be larger particles in the media that can clog the nozzle.
Answered by: NickC
Date published: 2015-03-13

Where are your blasters manufactured us overseas

Asked by: br549
  • 2015-04-01T10:03CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_22006, PRD, sort_recentAnswersFirst
  • clientName_eastwood

ALC Pressure Blaster 150 Pound

Item #22006 Brand: ALC

150-lb. blaster for heavy rust-paint removal; 70-min. blast time
Heavyweight- Special shipping charges may apply.
No additional discounts apply. This item ships direct from the vendor. Please allow 1-2 weeks for delivery.

Details

70-minute blasting time, 160-lb. media hopper, Two 1/8" (15 cfm) nozzles, One 5/32" (7 cfm) nozzle, 15 ft. 1/2"ID hose, Blast Hood with Bump Cap, Moisture Separator. Wear all appropriate safety gear. Blast hoods provide NO respiratory protection. The tank is ASME certified .Be sure to wear appropriate respiratory protection.This unit requires 10 cfm @ 90 psi.

More info...

About ALC Pressure Blaster 150 Pound

70 minute blasting time, 160 lb media hopper, Two 1/8" (15 cfm) nozzles, One 5/32" (7 cfm) nozzle, 15 ft. 1/2"ID hose, Blast Hood with Bump Cap, Moisture Separator. Wear all appropriate safety gear. Blast hoods provide NO respiratory protection. Be sure to wear appropriate respiratory protection.This unit requires 10 cfm @ 90 psi.


Contents

Consist of 2 packages: Package 1: Parts, weighs 24.28lbs, measures 18" Long, 12" Wide, 11" Deep Package 2: Tank only, weighs 52.153Lbs, measures 39" Long, 12 1/2" Wide, 14" Deep. The model 150 includes a 15' sand hose with quick disconnect, a moisture separator, 2 1/8" nozzles, and 1 5/32" nozzle, 3 seal blocks, and instructions.


Application

Runs on as little as 7cfm @ 80 psi with the 3/32" nozzle. The included 1/8" Nozzle requires 15 cfm @ 80 psi and the included 5/32" nozzle requires 25 cfm @80 psi. Fill with screened dry media only. Pressure blasters work best when the valve at the bottom of the tank is only slightly opened. Wear appropriate safety gear. Be sure to wear an appropriate respirator. This unit requires 10 cfm @ 90 psi.


Safety

WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, & body protection must be worn during use. Inhalation of silica particles can cause cancer & other deadly diseases. Wear NIOSH- approved respiratory protection during operation


Customers also viewed: