- Pressure Blaster Ceramic Nozzle 1/8"
Pressure Blaster Ceramic Nozzle 1/8"
Item #22013 Brand: Eastwood
requiring 15 cfm @ 80 psi
About Pressure Blaster Ceramic Nozzle 1/8"
Nozzles for the Pressure Blasters requiring 15 CFM @ 80 PSI 1/8"
The 1/8" Ceramic Nozzle allows you to run your pressure blaster on only 15 cfm at 80 psi (approx. 5 HP compressor). As the nozzle wears, it requires more air and eventually, usually after 6 hrs use, requires replacement if your compressor output is limited. Larger nozzles require more air but work faster.
WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, & body protection must be worn during use. Inhalation of silica particles can cause cancer & other deadly diseases. Wear NIOSH- approved respiratory protection during operation
Customers also viewed:
Restore a positive seal on blaster's deadman valve for safer blastingOnly $12.99
Just let go and it stops the flow from your pressure blasterOnly $83.99