Home
PRO-TEX Truckbed Liner System - Black

PRO-TEX Truckbed Liner System - Black

Item #10359 ZP

Maintenance-free urethane coating resists chemicals; covers 125 sq. ft.

Details

Pro-Tex™ Urethane Truck Bed Liner System puts down a tough, durable finish with the superior protection professionals expect SEM® Pro-Tex™ Truck Bed Liner System is tough yet flexible, with superior adhesion and chemical resistance.

Non-corrosive coating
Air- and water-tight
Sound-dampening
Maintenance-free
Black

About PRO-TEX Truckbed Liner System - Black

This black Pro-Tex coating demonstrates great adhesion, film build and flexibility. It's versatile, easy to use, and won't fade. Bonds permanently to most properly prepared surfaces, including steel, aluminum, and more. Chemical-resistant.

Air-dries in 8 hours; allow 48 hours before use of bed. Pot life is 20 minutes at 70 degreesF and 50% relative humidity. Covers 120-125 sq. ft. per gallon, enough material to coat most 8'-long truck beds.
Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

Click Here for Material Safety Data Sheet

1 gallon of Pro-Tex™ Urethane Liner
2 quarts of Pro-Tex™ Catalyst
2 plastic Schutz Bottles
2 Paint Pals

Pressure-wash the surface. Next, clean with our 10041Z PRE Painting Prep (not included). Then, sand the surface with 180-220-grit paper. If rust is present, grind or sandblast until all rust is removed. Apply a 2K epoxy primer or a urethane primer over any bare metal, following the mfr's. instructions. Sand the primer with 180-220-grit paper. Blow-off dust and tack-clean.