• Home
  • Prof. Undercoating Gun
Professional Undercoating Gun is rated 4.2 out of 5 by 6.
Rated 5 out of 5 by from NICE I enjoy using this I have had others no where near as effective as this tool (they all work this works the best) It is however pricey as a final note it is cheaper than the manufacturer (brand name) I would buy it again.very versatile most of the time you can spray the rust proofing thru the drain holes in the doors and frame,ect. because the wands are small enough to fit due its design it can deliver good volume out of the wand size it has most of the other applicators have larger wands so you have to make holes!
Date published: 2014-01-08
Rated 5 out of 5 by from Pro Undercoating Gun This model gun was recommended by the Eastwood tech I talked to. I used in with the Eastwood "Heat Insulation and Sound barrier" kit. I could not be more pleased with the way this gun functions. Yes it is way more pricey than the others offered by Eastwood , but personally think it is worth it. By the way, this guns cup is pressurized (I do not believe the others are). It pushes heavier materials with no effort at all. Great fluid control also.
Date published: 2015-12-31
Rated 1 out of 5 by from buyer beware repacment parts may not be availble we bought this 1 and a half years ago it is excellent quality as is the norm with Eastwood's. we use this product with fluid film undercoating about 20 to 30 vehicles a year. we recently had our first part break. our 360 degree tip got stuck in a rocker panel and broke off from its hose. we were not able to find any replacement applicators tips on there website. so we call Eastwood's 1 800 number the service professional was helpful and told us they would call when they found out about parts. when they called back they told us that the only applicator they can get for the gun is the 60 degree wide spray witch is not able to spray the insides of rocker panels. this product would be getting a five star rating and i would recommend it if it had replacement parts available but as it does not have parts available i must give it the lowest rating i can
Date published: 2015-09-16
Rated 5 out of 5 by from Has features other guns do not. This is a quality product. The main feature this gun has over others is the various wands that can be used to get into areas you can't see.
Date published: 2015-09-15
Rated 4 out of 5 by from Does the job well but beware no parts availiable This is a high quality product and allowed me to coat the insides of my 06 Liberty and 07 Silverado double cab without drilling or enlarging any existing holes. Description says 2 wands, I received three coiled together but the larger one surrounding the gun was not included. Time to update their web site. Do to the high cost I'm also wondering about what I'll do when I need replacement parts.
Date published: 2015-10-26
Rated 5 out of 5 by from performance quick delivery and quality product, will purchase in the future
Date published: 2014-12-10
  • y_2017, m_1, d_15, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_19867, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

I was verbally told the sprayer and 360 wand could shoot the Rust Encapsulator. I was unable to spray with the wand, but was able to spray with sprayer only (using pressures ranging from 40-60psi). Please advise.

Asked by: RMustaine
You may want to thin the Encapsulator a bit with some Lacquer thinner for it to spray.
Answered by: S Church
Date published: 2017-01-10

there was no air fitting on gun to hook up air hose (bs24)? special fitting?metric?

Asked by: hemiman348
This will just use the standard 1/4" NPT fitting.
Answered by: S Church
Date published: 2016-11-22

Will the #19867 Pro Gun spray the #16007ZP undercoating through all the supplied wands or are they for thinner rust proofing materials only. I need to spray undercoating over the top of the wheel wells and need a wand that has a 360 degree spray pattern.

Asked by: woodturner
These wands are for thinner materials such as our Heavy duty anti rust.
Answered by: S Church
Date published: 2016-08-23

Will this sprayer apply lizard skin products ? If so can the spray patten be adjusted J

Asked by: K Watson
This will apply lizard skin products with ease. The spray patter is not adjustable other than material flow since this is an undercoating gun.
Answered by: S Church
Date published: 2016-07-29

Will this gun work with POR 15 bed liner

Asked by: Boring
This will be perfect for use with the Por 15 bed liner.
Answered by: S Church
Date published: 2016-04-22

can't expand the pic clearly. what kind of tips are on the wands?

Asked by: joem
It comes with straight, 90 degree, and 360 degree or "mist" wands.
Answered by: MikeL
Date published: 2014-12-18


Asked by: MR B
Yes you can run fluid film with it
Answered by: SeanA
Date published: 2014-11-10

At the photo of the kit it´s a fourth wand twisted around the gun. Is this included too or is it extra (item 19867).

Asked by: Harald
The one wrapped around the gun is the main 60" wand that comes with it
Answered by: SeanA
Date published: 2014-11-08
  • 2017-01-16T07:33CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_19867, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Prof. Undercoating Gun

Item #19867 Brand: Eastwood

Pro gun applies undercoating, anti-rust... includes 3 flexible wands


This is how the pros apply undercoating, rustproofing and more Professional-grade gun is built to easily apply undercoating, Anti-Rust, protective waxes, soundproofing, gravel protection, and most bedliners.
  • Includes 3 flexible spray wands
  • 1-qt.-capacity cup
  • Requires 7-11 cfm at 45-60 psi

More info...

About Prof. Undercoating Gun

Sealed cup prevents non-catalyzed products from hardening during work breaks. Adjustable air flow, product flow and atomization let you create a customized range of textures used by OEMs. Requires 7-11 cfm at 45-60 psi. Includes 3 flexible spray wands (5' long, 1/4" in diameter) to apply rustproofing in doors, cavities, beams, etc. 1-year manufacturer's warranty. Made in Italy.


Undercoating/Rustproofing Gun
1-qt. Cup
3 Spray Wands

Customer Reviews

Questions & Answers