- Professional Brake Tubing Flaring Tool
Professional Brake Tubing Flaring Tool
in any of 5 sizes of tubing
- Create 45-degree single, double and bubble brake flares in seconds
- Brake-flaring tool works with stainless steel, steel, and soft metal tubing
- Use for brake lines, transmission cooler lines, fuel lines
- Turret-style indexed head keeps all brake-line-flaring forming dies ready to use
- Quick-release "T"-handle screw clamp securely holds the tube-retaining dies
- Includes brake-flare forming tool; 3/16", 1/4", 5/16", 3/8" and 4.75mm tube-retaining dies; handle; instructions and case
About Professional Brake Tubing Flaring Tool
This brake flaring tool mounts in your vise to help you easily form 45-degree single, double and bubble flares in OE steel, stainless steel, and soft metal tubing for 3/16"-, 1/4"-, 5/16"-, 3/8"- and 4.75mm-diameter lines...which means it will handle all your plumbing jobs from brake lines to transmission cooler lines and fuel lines.
"Turret-style" design allows you to make those precision flares in minimal time. All the brake-flaring forming dies you need are mounted right on the turret, so there's no fumbling for small parts, no worry about missing dies. "T"-handle screw clamp securely holds your line in place during forming.
To use, simply insert the tubing, swing the turret to step 1 to set the proper line depth. Turn the turret to step 2, where you'll form the flare. To form a double flare, spin the turret to step 3 to form it without cracks or deformation, and in perfect alignment with the fitting. This assures a tight, leak-free, professional brake flare every time!
Compare to high-dollar European or U.S. models and see for yourself—you can't beat the high-quality results you'll get with this brake-flaring tool. It's a professional-grade tool at a do-it-yourself price. Imported.
Vise-mounted brake-line flaring tool is crafted of forged steel, with durable, hardened-steel forming surfaces and dies. Includes quick-release "T"-handle screw clamp; forming tool; 3/16"-, 1/4"-, 5/16"-, 3/8"- and 4.75mm-dia. tube-retaining dies; instructions; durable molded case.
Always wear appropriate eye protection.
1-year mfr's. warranty against defects.
Accessories & Consumables
Customers also viewed:
Use with our Pro Flare Tool 25304 to create 37-degree flaresOnly $99.99
Straightens light wall tubing from 3/16" to 1/2" in diameterOnly $199.99
Directs a focused blast to penetrate deep into hard-to-reach places
Starting at: $12.99
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $9.99
Rolling-cam bender bends and forms in one smooth motion, distortion-freeOnly $49.99
Align, bend and adjust 3/16" and 1/4" lines with just a twist of the wristOnly $24.99