• Home
  • Eastwood Professional Welding Cart
Eastwood Professional Welding Cart is rated 4.1 out of 5 by 29.
Rated 4 out of 5 by from Professional Welding CartItem #20354 Brand: Eastwo I just recieved my new cart to hold my Eastwood mig 175 and my plasma cutter 60. The cart is well packed and is vary solid when completed. Couple of thoughts for future production. The surface the units sit on is slippery so when you turn dials the units slide around. The photo they send shows the tray essembly on the right side. Dont do that or you wont be able to open the wire feed door on your mig. I go it all together and had to take it apart and switch it around. The trays that hold your supplies are small and not deep enough. Would be nice to have a better way to wrap up power cords for units when not in use. Other than that a good combo cart.
Date published: 2015-11-11
Rated 3 out of 5 by from Recently purchased Product is a good design. Very helpful for me to keep both elders in one spot. The quality control of this product could have been a bit better though. The poser coating was not shiny and looked weathered out of the package. The holes lined up fine but one was not completely round and needed to be drilled out for the bolt to go through. It was pretty straight forward to put together but if you read the directions you would not think so. I threw them out after trying to inturpret the fist step and figured it out on my own. Overall I will still recommend it to a friend but hope they improve the quality control a bit.
Date published: 2015-08-26
Rated 5 out of 5 by from Not bad, could use a few changes I bought this last week, Aug 2016. The cart is pretty nice however; 1. If you have a small garage and have to move it around in tight spaces you can not steer it by the front wheels only and with 2 tanks on it it's hard to drag the rear around to maneuver it into it's parking space. I suggest, and plan on doing soon, putting swivel casters on the rear also, plus adding a handel on the rear like the on on the front so you can steer it from either end. 2. It needs a place to store your tig foot pedal. 3. With the tig welder requiring more attention then the mig welder, I put the mig on the lower shelf, thus the support bar is in the way so you should have the option of moving it forward.
Date published: 2016-09-13
  • y_2017, m_8, d_14, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_en_US, sid_20354, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

What is the TOTAL weight capacity? I don't just mean gas. I mean two welders plus bottle plus whatever.

Asked by: Chips O Toole
The cart now is rated for 400 lbs capacity due to upgraded components.
Answered by: Jaroddog
Date published: 2017-01-11

What is the weight of the cart

Asked by: Welderstu
This cart weighs about 62 lbs.
Answered by: KHoffnagle
Date published: 2016-10-11

What size gas bottles fit this cart?

Asked by: DPVJK
You can easily fit up to a 122 cubic foot bottle.
Answered by: S Church
Date published: 2017-04-19
  • y_2017, m_8, d_14, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_20354, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Professional Welding Cart

Item #20354 Brand: Eastwood

Holds 2 welders and gas bottles, plus consumables for easy movement around the shop

In stock

Only $149.99

Sale $137.97

 

Details

Holds 2 welders and gas bottles, plus consumables for easy movement around the shop

  • NEW - 30% thicker rear axle shaft
  • NEW - Stronger wheels with 65% wider hub
  • Cart holds up to 400lbs. - 2 welders, 2 large gas bottles and consumables
  • Rolls around shop easily on heavy duty wheels
  • For MIG, TIG or stick welders and plasma cutters
  • Stores up to 6 tubes of TIG rod
  • 3 hooks for hanging welding leads
  • Additional room for torches and consumables
  • Specially designed top shelf allows access to MIG side panel
  • Top shelf: 21 inches long x 13 inches wide
  • Bottom Shelf: 24.5 inches long x 16.75 inches wide
  • Lower shelf for welders up to 21.5 inches tall
  • Assembly required

This sturdy steel cart is designed to hold 2 units, plus 2 large 80 cubic foot bottles of shielding gas and the consumables. The top shelf is designed specifically to allow access to the side panel on MIG welders if needed. Works great for most TIG and stick welders, as well as plasma cutters too. You can easily adapt this cart to almost any 2 welders. There is room for up to 6 tubes of TIG rod, plus 3 hooks to coil and hang your hoses or cables. A front mounted handle and heavy duty wheels make it easy to move the welder to where the work needs to be done. There is even room to store torches and other consumables. The top shelf measures 21 inches by 13 inches, and the lower shelf is 24 inches long and nearly 17 inches wide for welders up to 21.5 inches tall.


More info...

Contents

One Unassembled cart with assembly instructions. 2 tool trays, 3 lead holders and 2 upper and 2 lower bottle holders. Bottom shelf is 24.5in long, 16.75in wide, and limited to 21.5in tall. Top shelf is 21in long and 13in wide.


Applications

Will hold the following combinations: MIG250 and TIG200ACDC, MIG 250 and Cut40/60, MIG175 and Versa Cut Plasma CutterMIG135 and Versa Cut Plasma CutterTIG200 and Versa Cut Plasma Cutter. May possibly fit other brand units as well.


Instructions

Click here for product instructions



Safety

Always secure the gas bottle with supplied safety hoops and wear the proper safety requirements when performing welding tasks. Can run up to a 125 CF 7 inch tank


Warranty

One Year Manufacturer's Defect Warranty. China


Customer Reviews

Questions & Answers

Customers also viewed: