• Home
  • Eastwood Rat Rod Black Kit w/2K Black Primer
Eastwood Rat Rod Black Kit w/2K Black Primer is rated 4.6667 out of 5 by 3.
Rated 4 out of 5 by from Overall good stuff Just sprayed and everything went down nice. Layed it down thick and it was on the colder side of the temperature spectrum. Still no runs and nice and smooth. I did add 20% reducer to the epoxy and 10% to the paint. It looked like it was going to end up shiny because it was dry to the touch and still really shiny in places. A few hours later the gloss left to become that perfect satin.
Date published: 2015-04-26
Rated 5 out of 5 by from Good product. Rat Rod Black Kit w/2K Black Primer is really good paint, and I'm really happy with the results. I painted my 47 Chevy truck with this kit. I had to use two kits to finish the job. It was my paint job, so I probably wasted a lot of paint. Overall it's really good and affordable kit. Thanks eastwood.
Date published: 2013-03-15
Rated 5 out of 5 by from blacked out buggy Paint laid down great. My crawled looks bad to the bone!
Date published: 2013-03-27
  • 2016-06-27T08:25CST
  • bvseo_cps, prod_bvrr, vn_cps_3.2.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_11278ZP, PRD, sort_relevancy
  • clientName_eastwood

I would like to paint a motorcycle with this system, My question is when I paint the tank will the gas that will end up on the paint on the tank end up marking up the paint?

Asked by: johsh31285
This is a catalyzed paint and will be highly chemical resistant. Just make sure to wipe up any spillage quickly and you should be fine.
Answered by: S Church
Date published: 2016-05-04

Does this kit come in rat-rod-satin-black?

Asked by: Arden
This kit includes the Rat Rod Satin black.
Answered by: S Church
Date published: 2016-05-09

can you use the epoxy on old scuffed finish and body fillers? or should i just use the regular primer?

Asked by: 86chevy
Epoxy is designed to be the base primer applied to bare metals.
Answered by: KHoffnagle
Date published: 2016-05-06

Can I use this to paint over the OEM paint that is in good shape? There is no cracking or peeling at all. I will have to take out a few dents and use a little body filler also. Painting a Suburban so I would probably need 2 kits?.

Asked by: Rkfltrx
Yes, this paint will work great over any cured automotive finish. Complete your body work as needed, prime with 2k urethane primer, block sand the primer with 400 grit, prep the surface with 400 to 600 grit paper elsewhere, and then top coat with this Rat Rod paint. Two kits should be enough for your Suburban. If you are doing the jambs, underhood area, back sides of panels as well I would recommend picking up a third kit, or quarts as needed to avoid issues arising from running out mid-job.
Answered by: MikeL
Date published: 2014-12-11

can this be used on bare metal

Asked by: jess
Yes, epoxy is the primer to use on bare metal.
Answered by: SeanA
Date published: 2014-10-21
  • 2016-06-27T08:15CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_11278ZP, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood Rat Rod Black Kit w/2K Black Primer

Item #11278ZP Brand: Eastwood

The perfect flat-black finish; includes primer, paint, activator, catalyst

Details

Give your "rat rod" that perfect flat-black finish...start with this Rat Rod Paint Kit! Some project rods just won't look finished until you've put on that distinctive, flat black finish. Our Rat Rod Flat Black is the only way to go.
  • Includes primer, paint, activator and catalyst
  • Single-step acrylic urethane
  • Exceptional long-term durability
  • UV- and chemical-resistant
  • Resists scratching and marring from normal wear

More info...

About Eastwood Rat Rod Black Kit w/2K Black Primer

Sure, some like to "drive her in primer", or opt for a quick "rattle-can" paint job, but our activated, single-step acrylic urethane Rat Rod Black is a smarter and much longer-lasting choice! Mix 3:1 with activator; no further reduction required. Complete coverage in two medium wet coats. This kit (see "Contents" tab) is enough to coat the outside of most cars.


Instructions

Click here to view product information sheet


Contents

21855ZP – Rat Rod Black Flat Paint, 96 ozs.
50246ZP – EW Epoxy Primer Black 1:1, Gallon
21856ZP – EW Urethane Activator, 32 ozs.
50245ZP – EW Epoxy Primer Catalyst 1:1, Gallon