Eastwood Chassis Black Paint Satin Aerosol 14 oz

    Item #10025Z

    Value
    Quality
    Price
    23 Review(s)

    Details

    Chassis Black Satin is the perfect coating at the perfect price for any undercar component Not glossy, not dull, just right! Authentic 60-70% gloss looks great on suspension parts and frame. Tough, long-lasting formulation resists chips, corrosion and temperatures up to 300 degrees F, so it's perfect for the value-conscious enthusiast who wants a factory-fresh look while staying within a budget.
    • Resists corrosion, chips and scratches
    • Resists brake fluid, fuel and solvents
    • UV-resistant
    • Matches OEM finish
    • Apply multiple coats without lifting

    About Eastwood Chassis Black Paint Satin Aerosol 14 oz

    Eastwood’s Chassis Black Satin is formulated to provide you with the right sheen, durability and long lasting great looks. Its 60-70% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards and much more. Fortified with high solids and epoxy, Chassis Black resists chips, UV rays and high temperatures up to 300°F. One aerosol can covers approximately 8 square feet. Buy 3 or more and save!


    Contents

    One 15 oz. aerosol can covers 8 Sq. ft, Max Temp 300F. Average car needs 3 to 5 cans.


    Warranty

    Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Application

    Ensure surface is clean, prior painting. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. DO NOT USE OVER SELF-ETCHING PRIMERS. Apply to surface about 8-10 inches from surface. It’s better to apply several light coats than one heavy coat. Ideal conditions 70°F to 90F° at 50% humidity. Conditions will affect dry times. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If recoating after 36 hours, scuff surface with 320 grit abrasive.


    Customers also viewed:

    Customer Reviews

    Items 11 to 20 of 23 total

    per page
    1. 1
    2. 2
    3. 3
    Great product (Posted on 2/26/13)
    Review by sgtdave
    Price
    Value
    Quality
    I've been restoring cars for over thirty years and this is by far the best spraying aerosol paint I've ever used. The results are excellent!
    scratches off easily (Posted on 2/5/13)
    Review by Rodberry
    Price
    Value
    Quality
    After doing my entire chassis over the past 2 years, I noticed that every time I went to re-assemble, there would be scratches and scuff marks. I started using extreme chassis black and it took the beating of tools and parts falling on the painted surface. This paint is fine in those places that are never seen but use a primer.
    One of Eastwood's Best Products (Posted on 7/7/12)
    Review by Blown Poncho
    Quality
    Price
    Value
    It's a great product to have on hand for small projects to larger frame repairs and chassis component restorations. Easy to use with excellent repeatability. The finish is quite durable and only really exceeded by powder coating.
    Durable easy to use paiint (Posted on 6/9/12)
    Review by Bamabeeper
    Price
    Value
    Quality
    I've used this paint in years past on other restorations. The rattle cans lay down a nice smooth finish with a fan spray nozzle that looks right on most chassis parts and frames. I've not had any trouble with clogging either. It dries reasonably quickly and is very durable after it completely dries. It's convenient in that you don't have to crank up the compressor and dirty up the spray gun for small jobs. I used 5 and a half cans on a Corvette frame, but will probably use another couple of cans on miscellaneous pieces. To me, this paint is more than adequate for use on a collector car that's driven and enjoyed.
    Great Paint - if you can use it all (nozzle problems) (Posted on 5/7/12)
    Review by RobRods
    Quality
    Price
    Value
    I've used this stuff for over 12 years. I did my '68 Camaro in 2001 and it still looks great and is tough as nails. Lots of material in spray, nice flow, great coverage. I still use it for my projects. My only issue is if I don't use the whole can the same day, when using a partial can a few days or weeks later the tip clogs so easily I rarely finish using the entire can. I can't tell you how many 1/2 used cans end up in the trash. I know how to 'flush' a nozzle and I don't have this issue with other brands. Eastwood needs a high quality delivery system to match the high quality paint.
    My fave (Posted on 3/24/12)
    Review by dac253
    Price
    Value
    Quality
    I really like this paint and I've used a lot of it over the years. I got one bad can 4 years ago and Eastwood sent a replacement.
    Great Paint, Great Coverage (Posted on 1/14/12)
    Review by Rays 52 Ford
    Quality
    Price
    Value
    I bought 5 cans to do the frame & axles on my 52 Ford F-1. It is a full bodied paint that covers well. Didn't have 1 run on the entire frame. Looks great! I'd use it again in a minute. Bought it during your free shipping promo, which made it an even better deal. Thanks.
    Great product if the nozzle works (Posted on 12/17/11)
    Review by clinton
    Quality
    Price
    Value
    Purchased several cans over the Years. I had one can that would not spray unless you pushed down and twisted the nozzle at the same time ! Eastwood said they couldnt see when I ever purchased the product ! So save your recipts dont learn the hard way like I did, as they did nothing to resolve it ! This can was a Waste of Money.
    Great to use (Posted on 12/15/11)
    Review by TODD
    Quality
    Price
    Value
    I've read reviews about nozzle problems and Eastwood now has the adjustable fan nozzles. All nozzles do sometimes plug up and that's why you save all your old nozzles and use as needed. This paint requires serious neglect to make it run. Super coverage and great finish. Remember if you live up north and keep paint in cold garage to bring it in were it can warm up, 24 hrs. best. a warm surface is better than cold, because it dries faster.
    Good finish, when it works (Posted on 3/15/11)
    Review by BSwan
    Quality
    Price
    Value
    Of the five cans I have received from Eastwood, three have clogged and stopped working. The clogging happens mid spray and ruined the finish on my freshly prepped part, to which I had to restrip the part. The two cans that did work put down and excellent finish.

    Items 11 to 20 of 23 total

    per page
    1. 1
    2. 2
    3. 3

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register