Eastwood Chassis Black Paint Satin Aerosol 14 oz

    Item #10025Z

    Details

    Chassis Black Satin is the perfect coating at the perfect price for any undercar component Not glossy, not dull, just right! Authentic 60-70% gloss looks great on suspension parts and frame. Tough, long-lasting formulation resists chips, corrosion and temperatures up to 300 degrees F, so it's perfect for the value-conscious enthusiast who wants a factory-fresh look while staying within a budget.
    • Resists corrosion, chips and scratches
    • Resists brake fluid, fuel and solvents
    • UV-resistant
    • Matches OEM finish
    • Apply multiple coats without lifting

    About Eastwood Chassis Black Paint Satin Aerosol 14 oz

    Eastwood’s Chassis Black Satin is formulated to provide you with the right sheen, durability and long lasting great looks. Its 60-70% gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards and much more. Fortified with high solids and epoxy, Chassis Black resists chips, UV rays and high temperatures up to 300°F. One aerosol can covers approximately 8 square feet. Buy 3 or more and save!


    Contents

    One 15 oz. aerosol can covers 8 Sq. ft, Max Temp 300F. Average car needs 3 to 5 cans.


    Warranty

    Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Application

    Ensure surface is clean, prior painting. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. DO NOT USE OVER SELF-ETCHING PRIMERS. Apply to surface about 8-10 inches from surface. It’s better to apply several light coats than one heavy coat. Ideal conditions 70°F to 90F° at 50% humidity. Conditions will affect dry times. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If recoating after 36 hours, scuff surface with 320 grit abrasive.


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 23 total

    per page
    1. 1
    2. 2
    3. 3
    Factory like appearance (Posted on 7/26/2014)
    Review by Gregg
    Quality
    Price
    Value
    I haven't had any problems with scratching like others have. My only complaint is the drying time is very long.I used this paint over Rust Encapsulator and was happy with the results. The color is perfect and the coverage is excellent.
    very good product (Posted on 7/10/2014)
    Review by bryan
    Quality
    Price
    Value
    it flows and lays nice. the finish looks excellent.
    Nice Product (Posted on 12/3/2013)
    Review by Dennis
    Quality
    Price
    Value
    Product sprays out nice and wears very well. You must follow instructions after use if you want to use the spray product at a future time. It does not spray well after storage for more than 9 months.
    great product (Posted on 11/19/2013)
    Review by Jacob
    Quality
    Price
    Value
    5 star
    excellent quality (Posted on 11/17/2013)
    Review by jerry
    Quality
    Price
    Value
    I have been using chassis satin black paint on a lot of parts i have restored . very happy with this paint for looks and quality .
    Good Product (Posted on 11/5/2013)
    Review by Mark
    Quality
    Price
    Value
    The finish of this product is as good as factory finishes. I spray it over a good coat of primer and I haven't had any problems with scratching as others have. My only complaint is the drying time is very long. I too have had 2 of eight cans plug up but I found that the product needs to be shook for a long time before using and frequently during use. I have used it on all my 64 T-bird front suspension and will use it on the rear suspension also. On rusted parts I use Rust Encapsulator first then Chassis black for the top coat for a very tough finished product.
    Great Paint (Posted on 6/12/2013)
    Review by Wayne
    Price
    Value
    Quality
    We used this paint over Rust Encapsulator and were very happy with the results. The sheen is perfect and the coverage is excellent. Highly recommended.
    Great all-purpose spray (Posted on 3/26/2013)
    Review by Jon
    Price
    Value
    Quality
    It sprays and coats nicely even with heavier coats. It's a lower solid paint so works excellent on pieces with intricate scroll work or shallow stampings. For a buildable coat on older pitted frames simply use Eastwood's "extreme chassis black". this spray works great on all sorts of parts
    Great versatile spray (Posted on 3/26/2013)
    Review by Jon
    Price
    Value
    Quality
    It sprays and coats nicely even with heavier coats. It's a lower solid paint so works excellent on pieces with intricate scroll work or shallow stampings. For a buildable coat on older pitted frames simply use Eastwood's "extreme chassis black". this spray works great on all sorts of parts
    Great product (Posted on 3/17/2013)
    Review by Mr Robert
    Price
    Value
    Quality
    This is the best spraying aerosol paint I've ever used, and it has just the finish I need for the undercarriage, not too glossy or flat, just right. Easy to spray with good coverage, and a rock hard finish that looks good for years. I always keep some in the shop, great for touch-up also.
    I use it mainly on my off-road Jeeps, and it holds up super, even to pressure washing ! The nozzle has a good spray pattern, never had a problem with that.

    Items 1 to 10 of 23 total

    per page
    1. 1
    2. 2
    3. 3

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register