Hi-Temp Lab Metal 24 oz
- No messy mixing or measuring
- Creates a durable, heat-resistant, rustproof repair
- Can be machined, ground, filed and sanded
- Paint or powder-coat afterwards
About Hi-Temp Lab Metal 24 oz
Hi-Temp Lab-metal withstands 1000 degrees F. If hi-temp leveling or filling is needed this is the product to use. Thin with Lab Solvent (10208ZP) to ease spreadability. Typically dries in 24 hours, heat cure at 425Â³ F for 1 hour before exposing to high temperatures. Great for filling surfaces before powder coating where 2 or more coats are required. Net wt. 24 oz.
One 24 oz. net wt. can of Hi Temp Lab Metal.
Use Lab Solvent (10208ZP) to help cmean surfaces and smooth out High Temp Lab Metal.
Made in the USA. Shelf life one year in unopened can.
Thin with Lab Solvent (10208ZP) to ease spreadability. Typically dries in 24 hours, heat cure at 425Â³ F for 1 hour before exposing to high temperatures. Great for filling surfaces before powder coating where 2 or more coats are required. Net wt. 24 oz.
Customers also viewed:
Clean-up or smooth Lab-Metal to minimize sandingOnly $13.99
36 yards of fiberglass tape can withstand high cure temperaturesOnly $25.99
Overall It's a Great Filler Prior to Powder-Coating
(Posted on 9/8/13)
Review by Mark
Quality Price Value
This stuff thinned out a little bit with the thinner made it very easy to dribble/run into the defect & worked great! I was able to lightly sand it down some then let it sit for the full 24 hours prior to curing the repair in an oven.
It hasn't shown any signs of shrinkage & accepts the charged powder as if it was the original metal. Overall, it's a great product if you use it for what it's intended to do; fill/patch damaged metal that has enough material there to allow it to bite into it.
lab metal, not useable!
(Posted on 8/16/12)
Review by roger
Price Value Quality
not what i needed
(Posted on 4/3/11)
Review by lovenhu
Quality Price Value