Hi-Temp Lab Metal 24 oz

    Item #10288Z Brand: Alvin Products

    Price
    Value
    Quality
    4 Review(s)

    Details

    For leveling or filling jobs that withstand up to 1000 degreesF, you need our High-Temperature Lab Metal Even in high-temperature applications, you can make permanent, rustproof, metal repairs with Hi-Temp Lab Metal.
    • No messy mixing or measuring
    • Creates a durable, heat-resistant, rustproof repair
    • Can be machined, ground, filed and sanded
    • Paint or powder-coat afterwards

    About Hi-Temp Lab Metal 24 oz

    Hi-Temp Lab-metal withstands 1000 degrees F. If hi-temp leveling or filling is needed this is the product to use. Thin with Lab Solvent (10208ZP) to ease spreadability. Typically dries in 24 hours, heat cure at 425³ F for 1 hour before exposing to high temperatures. Great for filling surfaces before powder coating where 2 or more coats are required. Net wt. 24 oz.


    Contents

    One 24 oz. net wt. can of Hi Temp Lab Metal.


    Accessories

    Use Lab Solvent (10208ZP) to help cmean surfaces and smooth out High Temp Lab Metal.


    Warranty

    Made in the USA. Shelf life one year in unopened can.


    Application

    Thin with Lab Solvent (10208ZP) to ease spreadability. Typically dries in 24 hours, heat cure at 425³ F for 1 hour before exposing to high temperatures. Great for filling surfaces before powder coating where 2 or more coats are required. Net wt. 24 oz.


    Customers also viewed:

    Customer Reviews

    4 Item(s)

    per page
    Did not work well (Posted on 2/17/14)
    Review by Ron
    Quality
    Price
    Value
    I used this product to repair 2 dents in a motorcycle fuel tank. the dents were 2.5" in dia. and about .5" deep. This product is extremely difficult to use. It took me 3 weeks of work and rework and even after that the result was terrible. You must apply in thin layers and wait for the solvent to dry before you can due any sanding or it just crumbles. Getting it ti feather out to a smooth edge I found impossible. I had to remove and start over several times and even after I thought I had it as good as I could it cracked in the oven and the outline of the patch was very visible. I have given up on this and will cover the areas with some type of decal. I not a happy camper!
    Overall It's a Great Filler Prior to Powder-Coating (Posted on 9/8/13)
    Review by Mark
    Quality
    Price
    Value
    I used this now twice to fill imperfections in several different valve covers I've powder-coated or am in the process of powdering.

    This stuff thinned out a little bit with the thinner made it very easy to dribble/run into the defect & worked great! I was able to lightly sand it down some then let it sit for the full 24 hours prior to curing the repair in an oven.

    It hasn't shown any signs of shrinkage & accepts the charged powder as if it was the original metal. Overall, it's a great product if you use it for what it's intended to do; fill/patch damaged metal that has enough material there to allow it to bite into it.
    lab metal, not useable! (Posted on 8/16/12)
    Review by roger
    Price
    Value
    Quality
    The product drys so fast, it starts to cake before you can apply it. Then it won"t stick to the steel. I tryed several different techniques with no success. Even when you prep the surface and add solvent to the filler as recommended. Sorry guys, It was a big waist of money and time.
    not what i needed (Posted on 4/3/11)
    Review by lovenhu
    Quality
    Price
    Value
    i bought prouduct from associates recomendatation. i needed something to seal small holes on exhaust pipes on my motorcycle. they are chromed and prouduct didnt adhere. iam not blaming him , i dont think i explained it right to him.

    4 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register