Gas Tank Sealer Kit For Motorcycles

    Item #10166Z

    Price
    Value
    Quality
    3 Review(s)

    Details

    Seal that older gas tank to keep rust out of your cycle's fuel system, and to seal minor leaks A clean supply of fuel is critical to the performance of your motorcycle - hard starting, stumbling under load, and sluggish response may be symptoms that your motorcycle's fuel system is dirty. The best way to ensure that the fuel is clean is to be certain that the fuel tank is free of rust by using a tank sealer. This Gas Tank Sealer Kit for Motorcycles rids the tank of damaging rust, and then seals it, so your fuel stays cleaner. Plus, it seals minor leaks, so there's no need to search all around town (or pay) for a replacement gas tank for your restoration project. Also great for lawnmowers, snow blowers, and other small gas tanks. Includes:
    • 7-oz. can of Metal Wash
    • 1 pint of Fast Etch Rust Remover
    • One 16-oz. bottle of Gas Tank Sealer

    About Gas Tank Sealer Kit For Motorcycles

    A clean supply of fuel is critical to the performance of your vehicle - hard starting, stumbling under load, and sluggish response may be symptoms that your car's fuel system is dirty. The best way to ensure that the fuel is clean is to be certain that the fuel tank is free of rust. This Gas Tank Sealer Kit seals minor leaks and can save you a great deal of time and money in trying to locate a replacement tank. For metal tanks up to 12 gallons. Ethanol blended fuels may adversely affect this sealer. For best results, do not use with E10 - E85 fuels.


    Contents

    This kit includes 1 pint of Rust Remover, a 7 oz. container of Metal Wash and 1 pint of sealer with instructions. Ethanol blended fuels may adversely affect this sealer. For best results, do not use with E10 - E85 fuels.


    Accessories

    Extra pints of Sealer are available individually as part #10087Z. Not for use in tanks containing Nitro Methane or Aniline oils.


    FAQ’s

    Additional sealer can be applied if the coating hasn't been exposed to fuel. Should the need arise to remove old sealer, pour in a gallon or more of acetone. It may take up to 2 days for the acetone to completely dissolve the old sealer. If you wish to use this system on a fiberglass tank, test for com- patibility by exposing an inconspicuous area to acetone to test for softening. If no excessive softening occures follow label instructions but omit Muriatic Acid and Eastwood Rust Remover steps. Omit the Muriatic Acid step if using this system in an aluminum tank.


    Safety

    Work in a well ventilated area. Leave at least one opening uncapped when not actually tumbling the tank.


    Warranty

    Made in the USA.


    Application

    The Gas Tank Sealer Kit will seal pin hole leaks in tanks up to 12 gallons capacity. Use in steel, stainless or aluminum tanks. Sealer withstands exposure to gas and diesel fuels. This kit requires the use of 2 quarts of Muriatic Acid, and 1 quart of Acetone, available from your local hardware or building supply. Please refer to label for complete instructions. Work in a well ventilated area, or wear a respirator like our Pro Respirator (34029). Use when ambient temperature is 60 degrees F or warmer. Allow coating to cure for at least 2 days before returning tank to service.


    Customer Reviews

    3 Item(s)

    per page
    easy to use great coverage (Posted on 7/27/13)
    Review by gary
    Price
    Value
    Quality
    I looked for a long time before I decided to get this sealer. I was not so sure when I had to buy the other items you needed but I got it anyway.... I have used this one kit on 3 tanks so far and the coverage is great if I need more I will buy it again!!! BZ Eastwood!!!
    BEWARE (Posted on 1/15/13)
    Review by bob
    Value
    Quality
    Price
    I purchased this KIT because it also cleaned the tank as well as sealed it.When it arrived there was a note THAT YOU WOULD ALSO NEED 3 OUNCES OF MURIATIC ACID. IT STATED THAT YOU CAN BUY IT AT ANY HARDWARE STORE...WELL IT COMES IN 1 GALLON CONTAINERS AND IS NOT CHEAP!!!\
    IF IT IS A KIT WHY NOT PUT THIS LITTLE BIT IN THE KIT???????
    A must do for the old bikes! (Posted on 4/13/11)
    Review by Kirk J
    Value
    Quality
    Price
    This is an excellent product from Eastwood with very easy to understand instructions. Having never sealed a gas tank before I was very pleased to have it go so well! You cant go wrong with this product and I found it has enough in it to do two tanks! Way to go Eastwood, you helped bring the old Honda Hawk back to life!

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register