Gas Tank Sealer Kit For Cars

    Item #10165Z

    Quality
    Price
    Value
    17 Review(s)

    Details

    Seal that older gas tank to keep rust out of your car's fuel system, and to seal minor leaks. Also great for keeping new tanks from rusting This Gas Tank Sealer Kit for Cars rids the tank of damaging rust, and then seals it, so your fuel stays cleaner. Plus, it seals minor leaks, so there's no need to search all around town (or pay) for a replacement gas tank for your restoration project.
    • 7-oz. can of Metal Wash
    • 1 pint of Fast Etch Rust Remover
    • Two 16-oz. bottles of Gas Tank Sealer
    • Muriatic Acid and Acetone are available locally

    Do you have a product idea? Click Here to suggest it!

    About Gas Tank Sealer Kit For Cars

    A clean supply of fuel is critical to the performance of your vehicle - hard starting, stumbling under load, and sluggish response may be symptoms that your car's fuel system is dirty. The best way to ensure that the fuel is clean is to be certain that the fuel tank is free of rust. This Gas Tank Sealer Kit seals minor leaks and can save you a great deal of time and money in trying to locate a replacement tank. For metal tanks up to 24 gallons. Tank Tone (10030Z) resembles the original finish.


    Contents

    This kit includes 1 pint of Rust Remover, a 7 oz. container of Metal Wash, 2 pints of sealer, and instructions.


    Accessories

    Extra pints of Sealer are available individually as part #10087Z. Not for use in tanks containing Nitro Methane or Aniline oils.


    FAQ’s

    Additional sealer can be applied if the coating hasn't been exposed to fuel. Should the need arise to remove old sealer, pour in a gallon or more of acetone It may take up to 2 days for the acetone to completely dissolve the old sealer. If you wish to use this system on a fiberglass tank, test for compatibility by exposing an inconspicuous area to acetone to test for softening. If no exces- sive softening occurs follow label instructions but omit Muriatic Acid and Eastwood Rust Remover steps. Omit the Muriatic Acid step if using this system in an aluminum tank.


    Safety

    Work in a well ventilated area. Leave at least one opening uncapped when not actually tumbling the tank.


    Warranty

    Made in the USA.


    Application

    The Gas Tank Sealer Kit will seal pin hole leaks in tanks up to 20 gallons capacity. Use in steel, stainless or aluminum tanks. Sealer withstands exposure to gas and diesel fuels. This kit requires the use of 2 quarts of Muriatic Acid, and 1 quart of Acetone, available from your local hardware or building supply. Please refer to label for complete instructions. Work in a well ventilated area. Use when ambient temperature is 60 degrees F. or warmer. Leave at least one opening uncapped when not actually tumbling the tank. Allow sealer to cure at least 2 days before returning to service.


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 17 total

    per page
    1. 1
    2. 2
    Very good product (Posted on 6/1/14)
    Review by Dick
    Price
    Value
    Quality
    I used to farm out gas tanks to a local shop but when once came back cautining me NOT to use ethanol fuel on the new coating, I switched to the Eastwood sealer kit. Instructions were clear and procedure was simple. Results have been excellent.
    very effective good quality product (Posted on 7/1/13)
    Review by charles
    Quality
    Price
    Value
    This is the second time I've used this celaner/sealer kit and both times the results were excellent.
    Inadequate (Posted on 3/10/13)
    Review by Michael
    Price
    Value
    Quality
    Eastwood simply doesn't supply enough product to treat a car tank. Similar products for motorcycle tanks worked pretty good for me, but they came with just as much stuff as this car tank kit (except they doubled the liner). With the amount of rust left in the tank I can't apply the liner... anyone want to buy two bottles of liner? The bigger issue is EW doesn't respond to voice, email or website inquiries. Maybe they should change the tag line to Do The Job Half Right.
    good product (Posted on 11/9/12)
    Review by Richard
    Quality
    Price
    Value
    time will tell if it adheres well. First coat was kinda spotty, awkward 50 gal slip tank. I'd recommend saving the drained epoxy in a sealed container and let first coat cure over night. Then pour the epoxy back in and give it a second coat. My second coat looked very good.
    good product (Posted on 11/9/12)
    Review by Richard
    Quality
    Price
    Value
    Time will tell if it adheres. first coat was spotty. I'd sugest saving the drained epoxy in a sealed container over night. Let the tank cure overnight and pour it back in and give it a second round
    Great product (Posted on 10/13/12)
    Review by Keith cox
    Quality
    Price
    Value
    Great product at a great value. Easy to follow instruction. Would recommend to anyone looking to save some money over buying a new tank.
    Great Product (Posted on 5/13/12)
    Review by JDinMD
    Price
    Value
    Quality
    I bought this kit for my ’66 MGB. This spring when I fired it up after the winter hibernation I discovered that the gas was contaminated and contained various particles. I suspect that the great ethanol enhanced gas we have to use here in Maryland helped contribute to the problem. I pulled the tank and discovered quite a bit of rust and other contaminants. The tank (a replacement )was not that old so I thought the tank sealing kit would be the way to help correct the problem. I obtained the kit and purchased the recommend extras (acetone and muric acid) locally. The instructions were clear and I had no problem with the installation. Instead of using a flow of air from an air compressor to flush the fumes from the tank as suggested, I used my wife’s hair dryer (don’t tell her!) on the cool air setting to flush the fumes with the tank ourside in fresh air.. The nozzle of the hair dryer fit perfectly in the gas gauge sender opening. I let this run for several hours over the course of two days and it worked just fine. Based on my experience and other heard stories about the effect of the ethanol enhanced gasoline, I recommend that one consider using this kit on either old or new metal gas tanks to help prevent potential tank damage from the ethanol enhanced gas.
    Good product (Posted on 7/2/11)
    Review by Benz Dr
    Price
    Value
    Quality
    Many of you classic Benz owners have fuel delivery problems. Most people replace everything else and exclude doing the tank. The tank is the FIRST thing you should do as after 30 years the tanks in these cars rust up internally. I got a 1/2 gallon of rusty sludge out of my tank and thought it would be too far gone to save but it had no holes and decided to try this tank sealer. It takes a while to do each step right but the results are very good. A new tank is $850 shipped for my car...I spent $50 on the kit and another $30 on the actetone and muratic acid. I am very happy with the results. Follow the instructions and it will restore your tank to like new condition inside. Anybody that owns a classic 1980 Benz or older NEEDS this product. While I was at it I replaced the fuel pump and filter and hope to not have any more fuel delivery problems for years to come. Luckily my injectors weren't clogged thanks to the filter ;-) It would be nice if Eastwood would make an injector cleaning device for the home garage mechanic....
    Good stuff (Posted on 5/2/11)
    Review by Scott
    Value
    Quality
    Price
    I had good results with the kit, but my tank is not 100%. I have a 83 Camaro tank and it has a bunch of baffles inside of it. I had to do the muriatic acid step twice and I still couldn't get all of the rust out of the inside of the tank. The coating was also difficult to get on everything and I might not have gotten everything due to the baffles. In the end, I am completly happy, the kit was ont $50 plus another $15 for a acetone and muriatic acid. A new tank for my car is over $200 and has known fitment issues. The parts I could see looked great and the old gas smell was gone. The coating will also be a plus due to the new ethanol blended fuels.
    Great Product (Posted on 4/18/11)
    Review by Will power
    Value
    Quality
    Price
    This was a great product. I purchased it to treat my tank since, after welding in a sump I never sealed the tank. The fuel would go stail fast. This product worked very well. Keep in mind though that you will also need to purchase Muriatic acid, and acetone to complete the steps to clean the tank. Follow the steps exactly and you will have a brand new looking tank. Also, set aside a few hours since it has you rotate the tank every 5-10 min in every step.

    Items 1 to 10 of 17 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register