Eastwood Self-Etching Primer Black Aerosol 16 oz

    Item #16114Z


    Self-Etching Primer Aerosol etches and primes bare, rust-free metal in one step Self-etching formula bonds better to bare metals than other aerosol primers, and as a single-stage formula requiring no catalyst, it's even easier to use.
    • Adheres to steel, aluminum, stainless steel, scuffed galvanized steel
    • 1 aerosol can covers about 10 sq. ft.
    • Withstands up to 170 degreesF
    Buy 3 or more and SAVE!

    Tech Tip:16037 Eastwood Rust Dissolver (Qt.) is ideal for removing light rust before using Self-Etching Primer.

    Do you have a product idea? Click Here to suggest it!

    About Eastwood Self-Etching Primer Black Aerosol 16 oz

    This easy to use aerosol etches and primes bare, rustfree metal in one step. Adheres to steel, aluminum, stainless steel, and galvanized steel and is compatable with virtually any paint or auto finish. This self-etching formula bonds better to bare metals than other aerosol primers. It is also a single- stage formula which requires no catalyst, making it even easier to use. Buy 3 or more and SAVE!


    Contains 16 ounces net weight. Covers about 10 sq ft. Lacquer based. Withstands up to 170 degrees F.


    Use our Pre-Painting Prep #10041Z to remove grease and oil before priming. Our Self Etching Primer is NOT recommended under the following products: Chassis Black Aerosol #10025Z, Gloss Chassis Black Aerosol #10000Z, or Chassis Black Quart #10043ZP. Buy 3 or more and SAVE!




    Self Etching Primer etches & primes in 1 step for superior adhesion. Can be used on steel, stainless, aluminum, or scuffed galvanized surfaces. For best results, clean surface to be painted with PRE Painting Prep (10041 Z) or Metal Wash (10120). 1 Aerosol covers about 10 sq ft. Max Temp 170 F. Lacquer based. Goes on thin & can be used with any additional primer or topcoat. For best results, topcoat before 24 hrs. After 24 hrs, surface must be scuffed. Exercise care when using this product over enamel finishes as lifting may occur. Shake can for at least 2 mins before spraying. Work in a well ventilated area.

    Customers also viewed:

    Customer Reviews

    2 Item(s)

    per page
    ...sorry..... (Posted on 6/1/2013)
    Review by Mark
    This stuff may be good for small areas, but....I painted the hood of my car with this.Yes,I took it down to bare metal.Took 2 cans (3coats) to do the job.After a while, product came out clumped and blotchy and clogged spray nozzle.Let dry for several days, and went to lightly wet sand with 400 grit and it took it down to the bare metal!This didn't meet my expectations at all..:>(
    Super product (Posted on 11/7/2010)
    Review by Corvettelen
    Needing to prime small parts which were cleaned, sanded or blasted this product performed flawlessly. No Need to mix small batches of primer or clean my spray guns after painting saved me a lot of time. It has very good adhesion and is an excellent base for any final paint. I highly recommend this product for its performance having excellent quality as Eastwood products are known for.

    2 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register