Rust Encapsulator Black Qt.

    Item #16065ZP

    Value
    Quality
    Price
    16 Review(s)

    Details

    Stop rust in its tracks! Our Rust Encapsulator has been reformulated with TWICE the corrosion resistance! You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
    • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster, and the low-VOC formula is acceptable in California
    • 1-quart can covers about 50 sq. ft.
    • As seen on "My Classic Car" TV show

    About Rust Encapsulator Black Qt.

    Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One quart covers about 50 sq. ft. with a double coat. Can be thinned up to 20% with lacquer thinner for spraying. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA. Buy 3 or more and save.


    Contents

    One quart of Rust Encapsulator, enough to coat up to 50 feet with a double coat.


    Accessories

    Heavy-duty Anti Rust Qt. (16017 Z P) is actually superior for applying into blind areas such as box sections where little or no surface prep can be done. Buy 3 or more and SAVE!


    FAQ’s

    Rust Encapsulator can be applied with the Undercoating System, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy Duty Anti-Rust (16017 ZP). This waxy, oily product flows into pinch welds & through rust to seal surface from contact with moisture & air, but cannot be painted over so is only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.


    Safety

    Work in a well ventilated area when applying this product. The use of a respirator like our Professional Respirator (34029) is recommended when applying this coating.


    Warranty

    Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Application

    Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposites. Thoroughly stir can contents to assure complete mixing. Feather surrounding paint with 220 grit sandpaper. Brush apply directly from the can or thin 20% w/lacquer thinner to spray. Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6-8 hours after last coat before applying top coat. See can label for more details.


    Accessories & Consumables

    Accessories

    Heavy-Duty Anti-Rust (16017ZP)
    Eastwoods Evolution HVLP Paint Gun Item (12776)
    Eastwoods Concours Spray Gun Item (51550)
    Eastwoods PRE Painting Prep, 30 ounce (10194ZP)
    Eastwoods Rust Converter


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 16 total

    per page
    1. 1
    2. 2
    A must for any restoration project (Posted on 4/23/14)
    Review by Blaine
    Price
    Value
    Quality
    Applies easily with brush or paint gun, lays out nice and holds up well. When you use with other Eastwood rust removers and prevention products,you don't have to worry, great product!
    Great product. (Posted on 2/25/14)
    Review by KEN
    Quality
    Price
    Value
    WOW! I've been using some of the old stuff (red) that I like because it would dry faster than POR-15. But this new encapsulator dries even faster - in just a few minutes. I don't have to stop working (stop creating dust) for 24 hours as with POR-15.
    Good product (Posted on 2/22/14)
    Review by Michael
    Quality
    Price
    Value
    treated my chevelle frame last Nov. been sitting outside in the elements, holding up VERY good. Recommend this product to anyone. wire brushed loose rust,brushed on product, went on smooth with no brush marks. Plan on using other items from eastwood if they work like this.
    Treats rust in hard to reach areas. (Posted on 11/21/13)
    Review by George
    Quality
    Price
    Value
    Great penetration into rusty areas behind the dash and inside the window pillars. I used a flexible spray gun to get into the pillars. You must wear gloves or you will wear the paint for a week.
    I find uses for this stuff (Posted on 10/14/13)
    Review by HeadrushinVA
    Quality
    Price
    Value
    I have used many products over that last 30 years to handle rust issues, but this is my favorite. Clean the rusty metal, paint, and you have a great surface to leave or prep for additional work. I started using this on my cars, but have since used it all around the home. I recommend it to everyone and with few exceptions it is my go to rust product. The spray version in black work great also.
    Review of Rust Encapsulator Black Qt. (Posted on 7/24/13)
    Review by Mustang7173
    Quality
    Price
    Value
    I have been reworking the sheet metal on my 1973 Mustang Hardtop and wanted a good product to seal up the work. We used it on the floor pans and in the trunk section. Very easy to spray and recommend.
    Good product (Posted on 6/13/13)
    Review by Richard
    Quality
    Price
    Value
    Product is very easy to apply, goes on smooth and from my experience does a good job against rust. I went over a trailer frame with a needle gun rather than sand blast and put a coat of rust encapsolator on it. Looks good and has not shown a reaccurance of rust now for two years. Trailer is not subject to winter road conditions with salt either so I don't know how it would be for that. Probably as recommended, one should top coat it with a good paint. I am currently doing another trailer frame and even though a bit expensive, I think it is worth it.
    Great stuff, easy to use (Posted on 5/27/13)
    Review by Bill
    Quality
    Price
    Value
    I applied with a sponge brush, easy, quick, covers well.
    Rust Encapsulator (Posted on 2/25/13)
    Review by Bill
    Price
    Value
    Quality
    I have used this product in the past, and it works very well. Goes on easy, and looks good.
    Great product (Posted on 2/24/13)
    Review by Bugman
    Price
    Value
    Quality
    I have used rust encapsulator for a while now and it works just as described. I just did my 52 Chevy floors and they look great.

    Items 1 to 10 of 16 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register