Rust Encapsulator Black 15 oz.aerosol

    Item #16060Z

    Quality
    Price
    Value
    39 Review(s)

    Details

    Stop rust in its tracks! Our Rust Encapsulator has been reformulated with TWICE the corrosion resistance! You thought it was good before...wait ’til you try this great anti-rust spray, the Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
    • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster, and the low-VOC formula is acceptable in California
    • 15-oz. aerosol covers about 10 sq. ft.
    • As seen on "My Classic Car" TV show

    About Rust Encapsulator Black 15 oz.aerosol

    Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective protection from rust yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One 15 oz. net wt. aerosol covers about 10 sq. ft. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA. Buy 3 or more and SAVE over individual pricing.


    Contents

    One 15 ounce net wt. aerosol, enough to cover up to 10 square feet.


    Accessories

    Heavy-duty Anti Rust Qt. (16017 Z P) is actually superior for applying into blind areas such as box sections where little or no surface prep can be done. Buy 3 or more and SAVE!


    FAQ’s

    Rust Encapsulator can be applied with the Undercoating System, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy Duty Anti-Rust (16017 ZP). This waxy, oily product flows into pinch welds & through rust to seal surface from contact with moisture & air, but cannot be painted over so is only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.


    Safety

    Work in a well ventilated area when applying this product. The use of a respirator like our Professional Respirator (34029) is recommended when applying this coating. Shake vigorously for 2 mins before spraying !!


    Warranty

    Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Application

    Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposites. Shake can for at least 2 mins after mixing ball starts to rattle. Feather surrounding paint with 220 grit sandpaper. Apply Rust Encapsulator can 10-12" from surface. Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6-8 hours after last coat before applying top coat. See can label for more details.


    Accessories & Consumables

    In places where little or no surface prep can be done, our Heavy-Duty Anti-Rust (16017ZP) is actually a better choice for applying into blind areas such as box sections. Buy 3 or more quart cans and save!


    Customers also viewed:

    Customer Reviews

    Items 21 to 30 of 39 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    Overall good product (Posted on 4/15/13)
    Review by Troy
    Price
    Value
    Quality
    Product performs as promised. been using it for over a year with no issues.
    Good stuff... (Posted on 2/24/13)
    Review by mooseburger2nite
    Price
    Value
    Quality
    I used Eastwood's Rust Encapsulator aerosol with the long nozzle to coat the inside on my 65 Mustang cowling, and the hard-to-reach areas of my trunk. Love the way the brass nozzle on the 24" extension sprays...does a great job. You can clean-up this nozzle assy with thinner and reuse so buy one of those and the rest with the reg spray nozzle...save a few bucks. Bought a quart of the brush-on to use on the accessable areas of my floor pans. Using Eastwoods brush-on Seam Sealer after the RE...hoping the car lasts another 48 years.
    Great (Posted on 9/23/12)
    Review by Model A Ken
    Price
    Value
    Quality
    The Rust Encapsulator gives the perfect finish to a Model A carburetor and is fuel resistant.
    Buy Extra (Posted on 6/30/12)
    Review by Robert
    Price
    Value
    Quality
    The product went on easy enough and looks good. Based on the reviews I hope it will keep the rust away under my body work. The coverage isn't what I expected so my recommendation is to buy more than you think you will need.
    Good Stuff (Posted on 6/28/12)
    Review by Don T.
    Price
    Value
    Quality
    After about the third can you start to get the hang of It. It is very watery but seems to work great.
    Great product, if you can get it out of the can (Posted on 8/8/11)
    Review by j2sax
    Price
    Value
    Quality
    Once it's on the metal it's as great as always. Unfortunately had a lot of trouble getting it out of the can with consistency in 92 degree weather and high humidity.

    When I thought I would be stopping for any appreciable amount of time, I turned the can upside down and sprayed clear, but the aerosol delivery was consistently progressively clogging even when using it constantly. Had to clear the nozzle with a needle and pick several times to get my full can's worth and this was all used on the same day.

    I will continue to use it, however, I hope this issue will be resolved as it otherwise a great project.
    Great product, but Aerosol less great! (Posted on 8/8/11)
    Review by j2sax
    Price
    Value
    Quality
    Love the product performance if you can get it out of the can.

    Opened the can the first time and started using it in 92 degree, high humidity weather. The can started clogging after just a few minutes of consistent use. It kept clogging and delivering inconsistent coverage as it would clog progressively.

    When I knew I was going to be stopping for awhile, turned can upside down and sprayed the nozzle clear. Still had problems clogging when I resumed use.

    Will still use in the future, however, I hope they can resolve these issues to make this an even more incredible product!
    Nice Product (Posted on 7/2/11)
    Review by Hammer
    Price
    Value
    Quality
    I have used this product primarily to refinish some steel wheels for my Alfa bought off Craigslist. The inners and lips were rusty, so a little brushing and a few coats, and voila, they look good. Also have used to cover some dings on a new exhaust pipe for my Alfa, pieces of my gas grill (didn't survive the heat, my bad), and a spot on the Alfa fender under an antenna trim piece. Next will be the underside of the F-150...I may need more cans
    excellent (Posted on 2/21/11)
    Review by alvin
    Quality
    Price
    Value
    on the 28 model a that was retrieved from a ditch i first use rust delsoverand worked my way up to rust encapulater. i put it on with a paint brush and was impressed. i have since coated with primer and had some blistering whick i don't unterstand. i will sand off the primer and recoat with encapulater.
    Good Results (Posted on 11/8/10)
    Review by dhmosquito
    Price
    Value
    Quality
    I just bought a used SUV that had been subjected to some harsh winters with some light rust spots in places on its independent suspension elements. I brushed off the loose rust and sprayed on the flat black encapsulator. It adheres well, dries quickly, and looks good. Drying time is minimal, especially in my low humidity environment. I can recommend the flat silver encapsulant too, which I also used in places. Eastwood's Rubberized Undercoating, which I have used in places, is a great product also. Based on my experience, I prefer the encapsulant treatment to a "rust convertor" that I tried from another company.

    Items 21 to 30 of 39 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register