Rust Encapsulator Black 15 oz.aerosol

    Item #16060Z

    Quality
    Price
    Value
    39 Review(s)

    Details

    Stop rust in its tracks! Our Rust Encapsulator has been reformulated with TWICE the corrosion resistance! You thought it was good before...wait ’til you try this great anti-rust spray, the Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
    • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster, and the low-VOC formula is acceptable in California
    • 15-oz. aerosol covers about 10 sq. ft.
    • As seen on "My Classic Car" TV show

    About Rust Encapsulator Black 15 oz.aerosol

    Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective protection from rust yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One 15 oz. net wt. aerosol covers about 10 sq. ft. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA. Buy 3 or more and SAVE over individual pricing.


    Contents

    One 15 ounce net wt. aerosol, enough to cover up to 10 square feet.


    Accessories

    Heavy-duty Anti Rust Qt. (16017 Z P) is actually superior for applying into blind areas such as box sections where little or no surface prep can be done. Buy 3 or more and SAVE!


    FAQ’s

    Rust Encapsulator can be applied with the Undercoating System, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy Duty Anti-Rust (16017 ZP). This waxy, oily product flows into pinch welds & through rust to seal surface from contact with moisture & air, but cannot be painted over so is only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.


    Safety

    Work in a well ventilated area when applying this product. The use of a respirator like our Professional Respirator (34029) is recommended when applying this coating. Shake vigorously for 2 mins before spraying !!


    Warranty

    Made in the USA. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Application

    Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposites. Shake can for at least 2 mins after mixing ball starts to rattle. Feather surrounding paint with 220 grit sandpaper. Apply Rust Encapsulator can 10-12" from surface. Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6-8 hours after last coat before applying top coat. See can label for more details.


    Accessories & Consumables

    In places where little or no surface prep can be done, our Heavy-Duty Anti-Rust (16017ZP) is actually a better choice for applying into blind areas such as box sections. Buy 3 or more quart cans and save!


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 39 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    excellent product!!!!!! (Posted on 3/3/14)
    Review by Travis
    Quality
    Price
    Value
    excellent coverage out of one can, done trunk,floorboards,etc. sprays evenly,outstanding product. no primer needed. can't say enough about this product,
    Excellent product (Posted on 2/4/14)
    Review by Don
    Price
    Value
    Quality
    I prefer this over POR-15 does the same thing !
    Good Stuff (Posted on 12/28/13)
    Review by Daryl
    Price
    Value
    Quality
    I'm restoring a 66 Pontiac LeMans which has been sitting outside neglected for a long time. I have used the Encapsulator on the seat frames which were extremely rusted. After knocking off all the loose rust and power washing, I painted the frames. The spray is a good thick stream which covers all nooks and cranny s very well. I'm very satisfied with the quality of the paint. Only time will tell if it holds up to the humidity in my area.
    Great Product (Posted on 12/3/13)
    Review by Dennis
    Quality
    Price
    Value
    This product is great, keeps rust away without top coating on parts I have stored for over a year. Any longer and you need to top coat with a quality paint. I use it on everything that I am not able to remove rust from completely before coating with paint or undercoating. Works great on floor panels before carpeting.
    Easy to work with (Posted on 11/15/13)
    Review by DANIEL
    Quality
    Price
    Value
    I restored a rusty jeep frame, blasted first then coated with Rust Encapsulator then painted over with Eastwoods 2K Aero-Spray Ceramic. Results look terrific. Time will tell how it holds up.
    great product (Posted on 11/14/13)
    Review by Robert
    Quality
    Price
    Value
    Amazing coverage! Some mentioned clogging. If you turn upside down and spray until nozzle is clear it doesn't clog!
    wow (Posted on 10/25/13)
    Review by chris
    Price
    Value
    Quality
    I do this for a living never seen anything that lives up to billing as well as this working on 56 chevy wagon great results going back and redoing all my other vehicles never do another again without it wow
    we will see if it works (Posted on 10/21/13)
    Review by ronald
    Price
    Value
    Quality
    Seems to cover well it will be exposed to the winter elements we will see how it holds up to the salt 7 ordered 12 cans 4 at a time a day after each order it went on sale i got screwed out of almost 4 dollars a can you would think they would let me know that it was going on sale i have hundreds invested a little break would of been nice
    The Ultimate Product! (Posted on 10/3/13)
    Review by Terry
    Price
    Value
    Quality
    I am 53 years old and grew up in the automotive repair business, my father was a body man from before I was born so I have seen a lot of "The latest Thing" products come and go. Eastwood Rust Encapsulator is the best rust product I have ever used bar none! I am currently restoring a 1971 Pontiac Lemans that is showing rust in the usual places, however beneath what you can see is the real culprit, it is rusted under the rear trunk panel to the point is was thin and weak, after prep and spraying with Rust Encapsulator, the strength of this rusted panel is incredible. One word of warning, wear clothing over every inch of skin as this stuff sticks to everything and sticks well. In a word? the ultimate Rust product! 5 stars straight across the board.
    Applies as advertised_only time will tell (Posted on 10/3/13)
    Review by jack
    Quality
    Price
    Value
    This product seems to be exactly what it says it is. Application was just as advertised. It did a nice job finding nooks and crannies, weeping through cracks that I did not know existed, even on top of the frame. I applied it to a small frame (Triumph GT6) and it seemed to take about 1.5 cans. Only time will tell if it actually prevents rust. The only reason I didn't give it a 5 was that I have no idea if it will work over time and of course I cannot actually see in the frame to confirm coverage (though as mentioned above it seemed to 'go deep')

    Items 1 to 10 of 39 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register