Rust Encapsulator Black-Gallon

    Item #16070ZP


    Stop rust in its tracks! Our Rust Encapsulator has been reformulated with TWICE the corrosion resistance! You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
    • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster, and the low-VOC formula is acceptable in California
    • 1-gallon can covers about 200 sq. ft.
    • As seen on "My Classic Car" TV show

    About Rust Encapsulator Black-Gallon

    Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One gallon covers about 200 sq. ft. with a double coat. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA.


    Black Rust Encapsulator, 1-agllon


    (Q) Can Rust Encapsulator be applied with the Undercoating System?
    (A) Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the 16017ZP Heavy-Duty Anti-Rust (Qt.). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.

    Safety / MSDS

    Work in a well-ventilated area when applying this product. The use of a respirator is recommended.

    Click Here for Material Safety Data Sheet


    60-day mfr's. warranty against defects.

    Designed, engineered and tested to Eastwood's specifications.

    Made in the USA.


    Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Brush-apply directly from the can, or thin 20% with lacquer thinner to spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.

    Accessories and Consumables


    In places where little or no surface prep can be done, our 16017ZP Heavy-Duty Anti-Rust (Qt.) is actually a better choice for applying into blind areas such as box sections. Buy 3 or more quart cans and save!

    Eastwood Rust Converter
    Eastwood Extreme Chassis Black
    Eastwood Rust Converter Aerosol

    Customers also viewed:

    Customer Reviews

    4 Item(s)

    per page
    Easy to work with (Posted on 5/4/2013)
    Review by Guy
    Sprayed on beautifully. Hopefully will keep the rust away for my lifetime.
    Great Stuff (Posted on 11/25/2012)
    Review by Dick Koch
    I've been using encapsulator as a 1st line of defence against rust for a long time. I use it as my primary primer over everthing.
    great stuff (Posted on 9/4/2011)
    Review by mrgreedy
    i used this on the frame to my 95 ranger. did just as they said it would. the price is high but worth every penny.
    Great Stuff! (Posted on 11/30/2010)
    Review by Paul
    This stuff is working great for me!

    4 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register