Details
Factory Gray High-Temp Coating sprays the look of cast iron on manifolds and headers
When you need to match the original cast iron look of manifolds and headers, our convenient Factory Gray High-Temp Coating Aerosol is your ideal choice for durability and good looks. Uses your engine's heat to cure.
Click Here For Tech Tips
Do you have a product idea? Click Here to suggest it!
- Just spray-on
- Stable up to 1,200 degreesF
Click Here For Tech Tips
Do you have a product idea? Click Here to suggest it!
Pre Painting Prep Aerosol 11 ozOnly $9.99 Sale $7.99 |
About Factory Gray Hi-Temp Coating 11.75oz aerosol
Each 11.75-oz. aerosol can of Factory Gray High-Temp Coating is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems.
Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.
11.75-oz. aerosol can of Factory Gray High-Temp Coating
Contains Toluene 108-88-33 1, 1, 1, 2-Tectraflourethene (HFC-134A) 811-97-2, Stoddard Solvent 8052-41-3,Aluminum Flake 7429-90-5,Mineral Spirits 64742-88-7, Phenylpropyl Silsesquioxanes 68037-90-1,Toluene 108-88-3,Carbon Black1333-86-4.
Keep away from heat, sparks and open flame. Use with adequate venting. Vapor is harmful. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call a physician immediately. Avoid prolonged skin contact and breathing of vapor mist. Warning: This product contains a chemical known to the State of California to cause birth defects and other reproductive harm.
Keep away from heat, sparks and open flame. Use with adequate venting. Vapor is harmful. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call a physician immediately. Avoid prolonged skin contact and breathing of vapor mist. Warning: This product contains a chemical known to the State of California to cause birth defects and other reproductive harm.
Customer Reviews
3 Item(s)
per page
-
A must for any engine swap!
(Posted on 1/29/11)
Review by Athan -
I picked up a can of this product a few years back for some exhaust manifolds for a 68 Pontiac. Years later the manifolds still look great! You put all that work into a new engine, don't just put the old manifolds back on there without this coating. Bare manifolds will oxidize over time and give you an eyesore in the engine compartment. Be sure to beadblast the manifolds before prep! Thanks Eastwood!Quality Price Value -
Great manifold coating
(Posted on 2/23/10)
Review by mrfirebird73 -
Goes on easy but could be a little darker and cheaper. Other than that it is a very good coating. Very pleased and will recommend.Value Quality Price -
Great coating for your exhaust manifold
(Posted on 1/25/10)
Review by Jukey3 -
Spray went on easy and adds a really nice look to my cast iron exhaust manifold. Really dresses up the engine! Highly recommended.Quality Price Value
3 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|