Factory Gray Hi-Temp Coating 11.75oz aerosol

    Item #10395Z

    Price
    Value
    Quality
    3 Review(s)

    Details

    Factory Gray High-Temp Coating sprays the look of cast iron on manifolds and headers When you need to match the original cast iron look of manifolds and headers, our convenient Factory Gray High-Temp Coating Aerosol is your ideal choice for durability and good looks. Uses your engine's heat to cure.
    • Just spray-on
    • Stable up to 1,200 degreesF

    Click Here For Tech Tips

    Do you have a product idea? Click Here to suggest it!

    About Factory Gray Hi-Temp Coating 11.75oz aerosol

    Now the same great 1200 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging. Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems.


    Contents

    11.75-oz. aerosol can of Factory Gray High-Temp Coating


    Accessories

    10132Z Exhaust Detailing Kit
    10020Z Aluminum Exhaust System Paint


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Safety

    Contains Toluene 108-88-33 1, 1, 1, 2-Tectraflourethene (HFC-134A) 811-97-2, Stoddard Solvent 8052-41-3,Aluminum Flake 7429-90-5,Mineral Spirits 64742-88-7, Phenylpropyl Silsesquioxanes 68037-90-1,Toluene 108-88-3,Carbon Black1333-86-4. Keep away from heat, sparks & open flame. Use with adequate venting. Vapor is harmful. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call a physician immediately.Avoid prolonged skin contact & breathing of vapor mist.Warning: This product contains a chemical known to the State of California to cause birth defects and other reproductive harm.


    Warranty

    QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Customers also viewed:

    Customer Reviews

    3 Item(s)

    per page
    A must for any engine swap! (Posted on 1/29/11)
    Review by Athan
    Quality
    Price
    Value
    I picked up a can of this product a few years back for some exhaust manifolds for a 68 Pontiac. Years later the manifolds still look great! You put all that work into a new engine, don't just put the old manifolds back on there without this coating. Bare manifolds will oxidize over time and give you an eyesore in the engine compartment. Be sure to beadblast the manifolds before prep! Thanks Eastwood!
    Great manifold coating (Posted on 2/23/10)
    Review by mrfirebird73
    Value
    Quality
    Price
    Goes on easy but could be a little darker and cheaper. Other than that it is a very good coating. Very pleased and will recommend.
    Great coating for your exhaust manifold (Posted on 1/25/10)
    Review by Jukey3
    Quality
    Price
    Value
    Spray went on easy and adds a really nice look to my cast iron exhaust manifold. Really dresses up the engine! Highly recommended.

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register