Rust Encapsulator Silver aerosol

    Item #16080Z


    Stop rust in its tracks! Our Rust Encapsulator (Silver) has been reformulated with TWICE the corrosion resistance! You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
    • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster, and the low-VOC formula is acceptable in California
    • 15-oz. aerosol covers about 10 sq. ft.
    • As seen on "My Classic Car" TV show

    About Rust Encapsulator Silver aerosol

    Low 3-5% gloss Silver Rust Encapsulator. As easy to apply and as durable as our popular Red and Black. Perfect under metallic and gray finishes.


    Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.


    In places where little or no surface prep can be done, our 16017ZP Heavy-Duty Anti-Rust (Qt.) is actually a better choice for applying into blind areas such as box sections.


    (Q) Can Rust Encapsulator be applied with the Undercoating System?
    (A) Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the 16017ZP Heavy-Duty Anti-Rust (Qt.). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.


    Work in a well-ventilated area when applying this product. The use of a respirator is recommended. Shake vigorously for 2 minutes before spraying.



    Customers also viewed:

    Customer Reviews

    4 Item(s)

    per page
    Rust Encapsulator (Posted on 1/9/2014)
    Review by JOHN
    This is an incredible product-rough out the surface rust-spray-allow to dry-sand again..
    You will be amazed at the results.It even filled the pits on my seat frames.
    encapsulator (Posted on 9/16/2013)
    Review by anthony
    very good product, great coverage, but i could have walked to PA before shipping showed !! I live one state over (OHIO ) PLEASE SPEED UP SHIPPING !!!!
    excellent product (Posted on 5/22/2013)
    Review by Jacob
    Rust encapsuator is a great product. Save alot ot time, and is just great to use or restoration projects. I would recommend this product with a 5 star rating.
    Easy to use (Posted on 4/23/2011)
    Review by Vernski
    I found it easy to use just spray it on the had part is the prep work. It makes a great primer for top coat and stops the rust. I won't know about that until some time passes though...Vernski

    4 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register