Spotweld Cutter Pro Kit 3/8 And 1/2 Inch

    Item #19004 Brand: Eastwood

    Details

    Solid steel Pro Spotweld Cutter Set effortlessly drills-out spot welds Two 1-piece cutters make clean cuts through spot welds, without damaging the bottom panel, with little or no grinding required to finish the job.
    • 3/8" (10mm) diameter
    • 1/2" (13mm) diameter
    • Solid, 1-pc. M2 steel
    • Self-centering point prevents "drill walking"
    • Over 300 cuts without sharpening

    About Spotweld Cutter Pro Kit 3/8 And 1/2 Inch

    Professional-grade cutter totally drills-out spot welds, with little or no grinding required to finish the job. Solid one-piece cutter is machined from M2 tool steel. Self-centering point prevents "drill walking". Extremely durable and long-lasting—shop tested at over 300 cuts without re-sharpening. 3/8"-diameter cutter works for most applications; 1/2"-diameter cutter is for trucks and convertibles. Drill at 700 to 2,000 RPM.


    Contents

    2 Pro Spotweld Cutters: 3/8" and 1/2" diameters


    Customers also viewed:

    Customer Reviews

    9 Item(s)

    per page
    great spot weld cutters (Posted on 2/6/2014)
    Review by Vince
    Price
    Value
    Quality
    These cutters are the only way to remove spot welds . They work awesome !
    Good Stuff (Posted on 5/8/2013)
    Review by John
    Price
    Value
    Quality
    These work fantastic. Make sure to use cutting oil.
    Worse Spot Weld tool I've used (Posted on 10/17/2012)
    Review by Robert
    Quality
    Price
    Value
    Spot weld became dull after third spot weld to be cut. Luckily I had a few from Harbor Freight where i paid 5 dollars per spot weld cutter. Completly disappointed in the craftman ship of the tool! Consider another spot weld cutter before spending $25 dollars on something that will not last but a couple of cuts.
    Disaapointed (Posted on 6/23/2012)
    Review by Eric
    Price
    Value
    Quality
    Not what i expected. The bit became dull and difficult to use after 5 uses. The bit also walks even after it has started cutting. I was 10 times more satisfied with a $5 spot weld bit from harbour frieght.
    Not as advertised (Posted on 6/19/2012)
    Review by Ao3burton
    Price
    Value
    Quality
    Needs sharpening after 4 cuts, and drill walks even after taping center and after bit starts cutting.
    low quality (Posted on 12/10/2011)
    Review by redskin1965
    Price
    Value
    Quality
    Always needed to drill a pilot hole.Also cutter seems to have dulled in approximately 40 cuts.
    Great tool! (Posted on 8/30/2011)
    Review by Pat
    Value
    Quality
    Price
    I've been using this on my 67 F-100 resto, these bits cut cleanly through the spot welds, I couldn't be happier!
    Best spot weld tool I have used (Posted on 7/21/2010)
    Review by dieselman1142@comcast.net
    Value
    Quality
    Price
    Best spot weld drilling tool I have used. In addition to the short bit they should offer an additional one that is longer to reach into certain spaces.
    Wored OK on some parts (Posted on 12/12/2009)
    Review by jim6346
    Price
    Value
    Quality
    Found that these worked great when seperating thin metal from thicker metal but had problems drilling out two thin metals spot welded together. Overall I was pleased with how they worked, but still HATE spotwelds :>)

    9 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register