Spotweld Cutter Pro Kit 3/8 And 1/2 Inch

Item #19004

Quality
Price
Value

8 Review(s)

Details

Solid steel Pro Spotweld Cutter Set effortlessly drills-out spot welds Two 1-piece cutters make clean cuts through spot welds, without damaging the bottom panel, with little or no grinding required to finish the job.

3/8" (10mm) diameter
1/2" (13mm) diameter
Solid, 1-pc. M2 steel
Self-centering point prevents "drill walking"
Over 300 cuts without sharpening

About Spotweld Cutter Pro Kit 3/8 And 1/2 Inch

Professional-grade cutter totally drills-out spot welds, with little or no grinding required to finish the job. Solid one-piece cutter is machined from M2 tool steel. Self-centering point prevents "drill walking". Extremely durable and long-lasting—shop tested at over 300 cuts without re-sharpening. 3/8"-diameter cutter works for most applications; 1/2"-diameter cutter is for trucks and convertibles. Drill at 700 to 2,000 RPM.

2 Pro Spotweld Cutters: 3/8" and 1/2" diameters

Customer Reviews

Good Stuff (Posted on 5/8/13) Review by John

Price
Value
Quality

These work fantastic. Make sure to use cutting oil.

Worse Spot Weld tool I've used (Posted on 10/17/12) Review by Robert

Quality
Price
Value

Spot weld became dull after third spot weld to be cut. Luckily I had a few from Harbor Freight where i paid 5 dollars per spot weld cutter. Completly disappointed in the craftman ship of the tool! Consider another spot weld cutter before spending $25 dollars on something that will not last but a couple of cuts.

Disaapointed (Posted on 6/23/12) Review by Eric

Price
Value
Quality

Not what i expected. The bit became dull and difficult to use after 5 uses. The bit also walks even after it has started cutting. I was 10 times more satisfied with a $5 spot weld bit from harbour frieght.

Not as advertised (Posted on 6/19/12) Review by Ao3burton

Price
Value
Quality

Needs sharpening after 4 cuts, and drill walks even after taping center and after bit starts cutting.

low quality (Posted on 12/10/11) Review by redskin1965

Price
Value
Quality

Always needed to drill a pilot hole.Also cutter seems to have dulled in approximately 40 cuts.

Great tool! (Posted on 8/30/11) Review by Pat

Value
Quality
Price

I've been using this on my 67 F-100 resto, these bits cut cleanly through the spot welds, I couldn't be happier!

Best spot weld tool I have used (Posted on 7/21/10) Review by dieselman1142@comcast.net

Value
Quality
Price

Best spot weld drilling tool I have used. In addition to the short bit they should offer an additional one that is longer to reach into certain spaces.

Wored OK on some parts (Posted on 12/12/09) Review by jim6346

Price
Value
Quality

Found that these worked great when seperating thin metal from thicker metal but had problems drilling out two thin metals spot welded together. Overall I was pleased with how they worked, but still HATE spotwelds :>)