Poly-X, Paint & Rust Removal Disc 4 inch Cup Style

    Item #13395 Brand: A W Tools

    Quality
    Price
    Value
    8 Review(s)
    Buy 3 or more and Save!

    Details

    Attach this Abrasive Cup Disc to your drill to effortlessly strip and clean metal Cup-style cleaning disc with recessed center-mounting hole is aggressive enough to strip paint and rust without removing excessive metal.
    • 4"(100 mm)-diameter disc
    • Silicone-carbide-impregnated abrasive
    • Open mesh resists clogging
    • 6500-rpm maximum

    About Poly-X, Paint & Rust Removal Disc 4 inch Cup Style

    Use it for rust removal, weld clean-up, and paint removal. Open-mesh, silicone-carbide-impregnated abrasive resists clogging and constantly exposes fresh abrasive for consistent cutting action. 7/8" steel-reinforced mounting hole.


    Customers also viewed:

    Customer Reviews

    8 Item(s)

    per page
    Works really good (Posted on 5/8/14)
    Review by James
    Price
    Value
    Quality
    I purchased a few of these to try. I found them to be very good. I am removing rust and paint from a 50 year old VW that has been repainted. They do not heat up the metal and I find them to hold up for the cost. They do a decent job removing rust as long as it is not too pitted. I liked them enough to make a 2nd order. I use them on my grinder and so far have had no problems.
    poor (Posted on 5/3/13)
    Review by Terry
    Price
    Value
    Quality
    I usually don't write reviews but felt I needed to on this one. Did not realize could add a picture or would have taken it before throwing in the trash. 1st one out of the box self destructed before grinder ever touched metal! Luckily I had on my protective gear. Now I'm limiting the use to a 18V drill to instead the of grinder. Works great for final burnish of metal, but wont cut through 3-4 layers of paint. NOT HAPPY!
    Great rust and paint remover (Posted on 4/18/13)
    Review by EDDIE
    Value
    Quality
    Price
    This work great on flat surfaces. i was able to strip hood to bare metal in about 40 minutes. it wears out quicker when doing small areas or jagged parts. I have bought several of these and completed the outside of a pickup. Its the lowest cost stripping pad I could find that works this well.
    works great (Posted on 4/2/13)
    Review by Joe
    Price
    Value
    Quality
    Takes paint off quickly and easily. for best results use very light pressure and let the disk do the work. This keeps the metal cool and saves work. Beware even though the backing pad for this product says 11k rpm i have had one explode. if you use this on an angle grinder beware of that.
    cheap and fast (Posted on 3/20/13)
    Review by triple6mendez
    Quality
    Price
    Value
    It a cheap and fast way to strip a car the only bad thing about this is the heat it crate I recommend a veritable speed grinder and or buffer to help reduce heat friction.
    little overpriced but great product (Posted on 8/11/11)
    Review by Nemo
    Price
    Value
    Quality
    If you are doing a complete car invest in the 7" one, its worth it. This one is great for the small corners or hard to reach areas. Wears out really fast so get plenty at once.
    worked as good as expected if not better (Posted on 12/25/10)
    Review by tbirddriver
    Price
    Value
    Quality
    someone ordered these for me for a car i was working on for them and i was pretty happy with them i went thru 3 of them doing 2 doors 1 hood and a trunk lid on a 66 mustang they held up well didn't leave gouges or heavy scratches in the metal pulls rust off pretty good as well . for heavy pitting rust you might wanna do some media blasting but i didn't wanna sandblast the car itself and get sand everywhere by far the fastest paint removal without blasting in my opinion. leaves a good surface for primer i spray painted a soda can directly after lightly brushing with one of these disk and you couldn't see the scratches. if would recomend ordering extras tho they're handy to keep around
    A great product (Posted on 3/16/10)
    Review by rjsill
    Quality
    Price
    Value
    This is an excellent product for the removal of surface rust, paint and old filler. Take the guard off your angle grinder, put on your welding apron, a good dust mask, ear & eye protection and welding gloves and go to it. This generates a lot of dust so have adequate ventilation. A light touch works best and the disc lasts longer. Disc does not clog and leaves a ready to paint finish on the metal. The open weave allows the disc to cool so the metal is not scorched. Works great even on the newer thin sheet metal panels. Stay away from tar or soft undercoatings, seam sealers and adhesives. A little expensive but probably worth the money in time saved.

    8 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register