Extreme Chassis BlackSatin 15 oz Aerosol

Extreme Chassis Black Satin 14 Ounce Aerosol

Item #11175 Z

Quality
Price
Value

24 Review(s)

Details

Extreme Chassis Black Satin has 3X the resins of traditional coatings, so it's tough enough for any undercar component You've spent many hours prepping your frame and suspension parts; now top-coat it with a tough, OEM-matching, satin formula that provides extreme durability! 3 times more resins make it 3 times more durable than our original Chassis Black.

Improved resistance against corrosion, chips and scratches
Resists brake fluid, fuel and solvents
Matches OEM finish
Apply multiple coats without lifting
14-oz. can provides about 8 sq. ft. of coverage

About Extreme Chassis Black Satin 14 Ounce Aerosol

3 times more resins make it 3 times more durable than our original Chassis Black coating. This maximum-durability satin formula offers improved resistance to brake fluid, fuel, solvent, chips and scratches.

For improved adhesion on clean, bare metal, first prime with Extreme Chassis Black Primer (aerosol 11193Z or quart can 11194ZP). For rusted metal, first prime with Eastwood Rust Encapsulator. Allow 15-20 minutes between coats of Extreme Chassis Black; can be re-coated at any time without lifting.

Made in the USA.

Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

Extreme Chassis Black Satin, 14-oz. aerosol

Accessories

10041Z PRE Painting Prep
51111Z Suspension Detailing Kit
50457Z Spray Gray Stainless Epoxy Coating
50458Z Detail Gray Stainless Epoxy Coating
10331Z Golden Cad System
10395Z Factory Gray High-Temp Exhaust Manifold Coating
10020Z Silver Exhaust System Paint

Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings.

Click Here for Material Safety Data Sheet

60-day mfr's. warranty against defects.

Designed, engineered and tested to Eastwood's specifications.

Click Here for product instructions

Customer Reviews

Holds up great (Posted on 6/11/13) Review by Nick

Quality
Price
Value

I used this product on the X frame of a 1958 impala and it shows great. I always read reviews before buying a product and some people says it will wrinkle or not lay on properly. If you prep your surfaces correctly it will lay out perfect with an amazing finish. Recommended it to a friend and he said the same thing, great product. 5*!

wow (Posted on 6/5/13) Review by Matthias

Price
Value
Quality

I rebuilt the front end of a '67 Catalina, and the spindles and control arms were a mess. Cleaned and degreased, primed with rust encapsulator and finished with this. I'm just amazed at how she looks now. Like better then factory.

WHAT HAPPENED? (Posted on 6/2/13) Review by Derek

Value
Quality
Price

I have bought and used alot of this, however these last few orders of it have me not wanting to use it anymore. First problem I had was wrinkling almost immediately after spraying over the extreme chassis primer, second issue on different parts it is not adhering even after scuffing. Not happy with this product anymore, seems like something has changed since the new cans/labels came out.

Exellent product (Posted on 5/20/13) Review by Ray

Value
Quality
Price

This is my first time using Eastwood products and I'm very pleased with the results. I wire brushed my frame, wiped down with PRE, applied their Rust Encapsulator with a foam brush then sprayed two coats of Extreme Chassis Black Satin. Very easy to spray, almost impossible to get a run. If I had to do again, I would use same products except I would spray. It looks great.

Nice finish (Posted on 4/28/13) Review by Michael

Price
Value
Quality

Very durable,covers nice, I actually use it under the hood for the fire wall and pulleys, p/s pump etc.

Extreme chassis black satin (Posted on 4/28/13) Review by Michael

Price
Value
Quality

When parts are prepped correctly this paint looks great and has just the right amount of gloss to it. I'm actually using it in the engine bay because I like the finished look better than the under hood black. (Firewall, p/s pump pulleys etc.)

Tough surface goes on with a crinkle finish (Posted on 4/4/13) Review by Phil

Quality
Price
Value

I used this product on an old motorcycle swingarm. I didn't order the primer but this stuff created a slightly rough texture not glass smooth.

Great Paint (Posted on 3/19/13) Review by Doug

Quality
Price
Value

This is actually the first thing I had ever used from Eastwood, but has not been the last. I'm currently using it to redo a Ford 8.8 rear. Disassembled the whole thing, painted the housing, and even continuously spinning the painted housing on steel jackstands throughout the reassembly process, the only damage was some scratch marks. No chips. No gouges. Really clean. Apply to a clean surface, and allow it to cure properly, and this stuff is as hard as a rock.

Botom Line (Posted on 3/1/13) Review by Cindy

Price
Value
Quality

Here is the bottom line. Very easy to apply when items are prepped correctly, finish is great, wish it was a little more durable and less prone to chipping during assembly so be careful swinging the wrenches and as far as price goes, its reasonable when its on sale which seems to be a day later after I order it every time.

product good ....warranty not (Posted on 2/1/13) Review by Skeetum

Price
Value
Quality

Eastwood in general, has good products, but their 60 day warranty on 'spray' products is not. They bombard you with daily specials that 'end tonight'. If you take advantage of their sales and stock up. you better use it within 60 days or you are **** out of luck. Price, Value, and Quality doesn't matter if it wouln't come out of the can!