Eastwood 3/8in Double Ended Spot Weld Cutter

Item #11279 Brand: Eastwood

Quality
Price
Value

6 Review(s)

Details

3/8" Double-Ended Spot Weld Cutter cuts around the actual spot weld Double-ended spot weld cutter quickly removes spot welds without damaging the underlying panel. With double ends, you'll drill twice as many holes as with single-ended cutters.

Both ends have cutting teeth
When one end dulls, switch to other end
3/8" in diameter

About Eastwood 3/8in Double Ended Spot Weld Cutter

Cuts around the spot weld, freeing the panel without damaging the underlying one. Cutter is double-sided for cutting more holes. For 1/4" and larger drills.

One 3/8" Double-Ended Spot Weld Cutter

Customer Reviews

not what I had hoped (Posted on 5/17/13) Review by James

Value
Quality
Price

I agree with some of the other reviews, it works well but the blades will brake on the slightest snag. One of the blades broke when I was removing it and fliping it over. if you buy this buy lots of extra blades.

spot weld cutter (Posted on 11/23/12) Review by tigerlaker

Quality
Price
Value

all the teeth where broken on both sides after only about 20 spot welds, I was trying to be careful but to no avail

great product (Posted on 1/21/11) Review by Jason

Price
Value
Quality

highly recomended

Cleanly parts the welded metal (Posted on 12/18/10) Review by Dave R

Price
Value
Quality

Easy to use. Dimple the middle of the weld to hold the center point and cut. The outer layer comes right off without leaving a hole in the under layer. Tool is durable and a great value.

Functions but expect to purchase many bits. (Posted on 9/12/09) Review by speedfreq

Price
Value
Quality

First off this thing does a good job of cutting around the actual spot weld. The problem though is that if you catch it funky in any way it will snap the teeth off. You can still cut with a few teeth missing until you ultimately catch it again and snap the rest off. If you purchase this just expect to purchase more bits and do yourself a big favor and drill pilot holes into the welds before you try to use this tool. If it starts walking you will end up breaking teeth. I may have tried something else first if I had known this but I prefer to not put a hole through both pieces if I don't have to.

OK (Posted on 9/9/09) Review by windyhill

Value
Quality
Price

These cutters cut well but are very brittle. The slightest hang up and the teeth all shatter off. also found that drilling a small centering hole for the center pin to ride in helped. The first hole I drilled broke my first set of teeth. was able to get better desalts after a while but still went threw 4 sets (two cutters) drilling out 30 or so spot welds.