Eastwood 3/8in Double Ended Spot Weld Cutter

    Item #11279 Brand: Eastwood

    Price
    Value
    Quality
    9 Review(s)

    Details

    3/8" Double-Ended Spot Weld Cutter cuts around the actual spot weld Double-ended spot weld cutter quickly removes spot welds without damaging the underlying panel. With double ends, you'll drill twice as many holes as with single-ended cutters.
    • Both ends have cutting teeth
    • When one end dulls, switch to other end
    • 3/8" in diameter

    About Eastwood 3/8in Double Ended Spot Weld Cutter

    Cuts around the spot weld, freeing the panel without damaging the underlying one. Cutter is double-sided for cutting more holes. For 1/4" and larger drills.


    Contents

    One 3/8" Double-Ended Spot Weld Cutter


    Customers also viewed:

    Customer Reviews

    9 Item(s)

    per page
    Good tool, not very resilient (Posted on 5/22/14)
    Review by Vincent
    Value
    Quality
    Price
    So this tool works great, before it wears out, and it wears VERY quickly. I think I cut out 12-15 spot welds per side before it was done. It needs to be made to have harder points so it wears better, or make the replacement cutters a requirement.
    Good tool, needs to be more resilient (Posted on 5/22/14)
    Review by Vincent
    Value
    Quality
    Price
    I used this tool to remove some welds on my 77 BMW. It worked great, but the cutters wore down very quickly. I recommend using a 1/16" bit to prevent the tip from skating all over the place.
    great tool (Posted on 11/4/13)
    Review by Danny
    Quality
    Price
    Value
    great tooland if you follow the instructions it works very well. As my Grandfather and father told me , " let the tool do the work , that's why you bought it". The only disappointment I had was the 6x8x11 box that the 3x4x1/2" product came in.
    not what I had hoped (Posted on 5/17/13)
    Review by James
    Value
    Quality
    Price
    I agree with some of the other reviews, it works well but the blades will brake on the slightest snag. One of the blades broke when I was removing it and fliping it over. if you buy this buy lots of extra blades.
    spot weld cutter (Posted on 11/23/12)
    Review by tigerlaker
    Quality
    Price
    Value
    all the teeth where broken on both sides after only about 20 spot welds, I was trying to be careful but to no avail
    great product (Posted on 1/21/11)
    Review by Jason
    Price
    Value
    Quality
    highly recomended
    Cleanly parts the welded metal (Posted on 12/18/10)
    Review by Dave R
    Price
    Value
    Quality
    Easy to use. Dimple the middle of the weld to hold the center point and cut. The outer layer comes right off without leaving a hole in the under layer. Tool is durable and a great value.
    Functions but expect to purchase many bits. (Posted on 9/12/09)
    Review by speedfreq
    Price
    Value
    Quality
    First off this thing does a good job of cutting around the actual spot weld. The problem though is that if you catch it funky in any way it will snap the teeth off. You can still cut with a few teeth missing until you ultimately catch it again and snap the rest off. If you purchase this just expect to purchase more bits and do yourself a big favor and drill pilot holes into the welds before you try to use this tool. If it starts walking you will end up breaking teeth. I may have tried something else first if I had known this but I prefer to not put a hole through both pieces if I don't have to.
    OK (Posted on 9/9/09)
    Review by windyhill
    Value
    Quality
    Price
    These cutters cut well but are very brittle. The slightest hang up and the teeth all shatter off. also found that drilling a small centering hole for the center pin to ride in helped. The first hole I drilled broke my first set of teeth. was able to get better desalts after a while but still went threw 4 sets (two cutters) drilling out 30 or so spot welds.

    9 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register