Dynamat Extreme Bulk Pack

    Item #11675 Brand: Dynamat


    Dynamat® Xtreme deadens noise, giving your vehicle a more solid sound and "feel" Install Dynamat® Xtreme in your ride and listen as the doors and trunks slam snug, and road and wind noise virtually disappear. Use Dynamat on almost any body section for a "sound" improvement in your ride, as well as heat reduction.
    • 4 times the sound deadening material effect, but half the weight, of original Dynamat
    • Reduces interior temperatures up to 50%
    • Cut to size with knife or scissors, then peel and stick
    • For floors, doors, roof, hood, trunk lid, quarter panels and more

    About Dynamat Extreme Bulk Pack

    Ideal for soundproofing your car, here's one sound-deadening product that can be used on virtually any body panel. Extreme Dynamat provides four times the sound-deadening effect, but half the weight, of Original Dynamat, and it cuts interior temperatures up to 50%. Bulk pack includes 9 sheets, each 18" x 32" x 0.060" thick, to cover about 36 square feet total.


    Bulk pack includes 9 sheets, each 18" x 32".


    Remove any carpeting and underlining materials, then wire-brush or blast steel floor, trunk or door panel to remove rust. Use Rust Converter or Rust Encapsulator to treat any areas that cannot be blasted. Use 52050 Dynamat Applicator Roller to apply Dynamat. Overlap edges or use 52144 Seam Tape.


    52144 Seam Tape
    52050 Dynamat Applicator Roller
    52296 Door Panel and Trim Removal Set

    Customers also viewed:

    Customer Reviews

    3 Item(s)

    per page
    Dynamat Extreme Bulk Pack (Posted on 2/13/2013)
    Review by jimmy
    I put this stuff on the doors of both my Toyota T-100 and my 1979 El Camino and gained so much more in sound quality from my speakers. I also got this for the roof of the 'camino, now when it rains I hear more music and less weather.
    I love this stuff.
    The floors of both cars are next!
    Dynamat very eazy to intsall (Posted on 4/21/2010)
    Review by Art
    I used Dynamat on the floor board and fire wall of a Alfa Romeo Spider I am restoring. It was very easy to install but did take some time. It cut easy with scissors and stretchs to conform to contours. Before I intsalled Dynamat the car was very noisy and the floor over the exhaust was to hot to put your hand on. After it was installed the Alfa was much queiter and the floor board was just warm. The shop that is making the carpets realy liked the way the Dynamat looked
    Good (Posted on 3/19/2010)
    Review by PJR
    Product was easy to install but be patient. I recommend not pulling off entire backing sheet work a little at a time as this stuff sticks well to clean surfaces. A word of caution, wear some type of mechanix glove as the aluminum surface is very sharp on all edges and can cut your fingers quickly! Cannot rate performance yet as car has not been driven.

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register