8pc Dual-Cut Carbide Burr Set - 1/4inch Shank

    Item #11779 Brand: Eastwood

    Price
    Value
    Quality
    7 Review(s)

    Details

    Shape and deburr quickly and accurately with Carbide Burrs These 8 carbide burrs are the preferred choice for precise metal removal when shaping, leveling, or porting cast iron, steel and other ferrous metals.
    • 2 cylindrical burrs
    • 2 cylindrical/radius-end burrs
    • 2 ball-shaped burrs
    • 2 cone/radius-end burrs

    About 8pc Dual-Cut Carbide Burr Set - 1/4inch Shank

    Double-cut and precision-ground for vibration-free operation in your 20,000-rpm die grinder. All burrs have a 1-1/2" long, 1/4" shaft. 90-day mfr's. warranty.


    Contents

    2 cylindrical burrs: 1/2" x 1" and 3/8" x 3/4"
    2 cylindrical/radius-end burrs: 3/8" x 3/4" and 1/4" x 5/8"
    2 ball burrs: 1/4" and 3/8" diameters
    2 cone/radius-end burrs: 3/8" x 3/4" and 1/2" x 1"


    Customers also viewed:

    Customer Reviews

    7 Item(s)

    per page
    must have tool (Posted on 8/6/14)
    Review by JOHN
    Value
    Quality
    Price
    good quality, just the right tool for cleaning up radius areas
    Very good product (Posted on 12/11/13)
    Review by michael
    Quality
    Price
    Value
    I received these double angled cutters. WOW, they do remove material, all you have to do is guide them, and let the chips fly. I will re-order when my set gets dull.
    Good Product (Posted on 12/9/13)
    Review by Jeffrey
    Quality
    Price
    Value
    I purchased along with the 4 piece dual cut carbide set to port a cast iron MGA cylinder head. I used a variable speed drill rather than a die grinder. Bits are very sharp out of the box, and cut rapidly, especially the rough casting material. My criticism of these bits is that the shaft is too short. The 4 piece set had greater utility due to the longer reach. These are far superior to anything I've ever seen at the local hardware or big box stores.
    Quite Happy (Posted on 11/8/13)
    Review by Mike
    Quality
    Price
    Value
    I wasn't expecting the quality and durability for the price, so was pleasantly surprised. Even the holding-case is nice, form-fitting with magnetic-latch. I punished a couple of these on inside-corner weld-beads, and metal-chips were just flying! No bluing (yet) either.
    8pc Dual-Cut Carbide Burr Set - 1/4inch Shank (Posted on 5/13/12)
    Review by chrisserv01
    Price
    Value
    Quality
    Very Good tool,I like to deal with you's Eastwood!
    Great performance (Posted on 3/13/12)
    Review by Buck Wild
    Price
    Value
    Quality
    These were part of my first order from Eastwood, I was very impressed with their performance. I had to ream out some hardened frame steel, light pressure starting out because these burr cutters will cut faster than you realize. When I was done, I could not tell that I had used the cutter, all the teeth were totally intact and not dulled in the least.
    I plan to equip my shop with Eastwood tools, GREAT TOOLS EASTWOOD !!!!
    Holy Cow (Posted on 4/16/11)
    Review by John
    Value
    Quality
    Price
    If you never used a double cut. Just be fore warned these suckers bit hard and quick and remove materail faster than normal carbide. I was shocked!!
    Glad I bought them,used for rod beaming and deburring block and heads (Only for heavy materail removel)

    7 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register