Search Our Site
Product Categories
- !!Dad's Day Sale!!
- !Hot New Items!
- Abrasive Blasting
- Air Tools
- Airbrush
- AutoBody
- Buffing
- Clearance
- Daily Deals
- Hand Tools
- Interior Repair
- Metal Fabrication
- Motorcycles
- Paint Equipment
-
Paints
- Eastwood Single Stage Urethane Paints
- Detail Paints >
- Underhood paints
- Pinstriping
- Powder Paints
- Primers >
-
Auto Air Waterborne Paints >
- Auto Air Basecoats
- Auto Air Candies
- Auto Air Flairs
- Auto Air Fluorescents
- Auto Air Gems
- Auto Air Hi Lites
- Auto Air Iridescents
- Auto Air Metallics
- Auto Air Pearls
- Auto Air Semi Opaques
- Auto Air Sparklescents
- Auto Air Transparents
- Auto Air Sealers & Reducers
- Auto Air Instructional DVDs & Kits
- Auto-Borne Paints
- Auto Air Hot Rod Sparkle
- Auto Air Cosmic Sparkle
- Clear Coats
- Trunk Spatter paints
- Interior dyes
- Eastwood Candeez Candy Paints
- Eastwood Muscle Colors
- Eastwood Low VOC Basecoats
- Pinstriping
-
Powder Coating
-
Powders >
- Chrome Powders
- Black Powders
- Clear Powders
- White Powders
- Blue Powders
- Red Powders
- Green Powders
- Yellow Powders
- Orange Powders
- High Temp Powders
- Powder Sampler Kits
- Translucent / Candy Powders
- Powder Coat Primer
- HotCoat Textured & Detail Powders
- Metallic Powders
- Silver Powders
- Gray Powders
- Purple Powders
- Powder Coat Guns
- Ovens
- Curing Lamps
- Booths
- Prep/Stripping
- Accessories
- Powder Gun Accessories
-
Powders >
- Rust Solutions
- Shop Tools & Equipment
- Soda Blasting
- Specialty Coatings
- Undercar & Drivetrain
- Underhood/Engine
- Welders
How to Info
-
What our customers are saying...
"The Eastwood products are the highest quality"
- Bill from Lexington, KY
 |
||||
|
||||
|
Recently Viewed Items
-
Rotisserie Standard Model Bare SteelItem #12171
-
Rotisserie PLUS Model Bare SteelItem #12172
-
Restoration Rotisserie Plus Blue PowdercoatItem #12174
Community Poll
About Portable Soda Pressure Blaster
Remove coatings without etching or warping the metal. Ideal for stripping fiberglass, steel and aluminum. This compact blaster is suitable for stripping subassemblies and individual components. Provides up to 30 minutes of blast time. Comes equipped with a 3/32" nozzle (requires 12 cfm at 80 psi), 5' by 1/2" ID abrasive hose, UL299 approved 10 lb capacity pressure tank, and instructions. Made in USA. WARNING: Must be used with appropriate respiratory and other protection. See "SAFETY" for more in depth information. instructions. Made in USA. WARNING: Must be used with appropriate respiratory
Bicarbonate Soda blasting is much safer than traditional abrasives and also more gently to the metal or substrate you are blasting. However you must still protect yourself from the dust and more importantly the particles of paint, corrosion or scale that have becoming airborne during the blasting operation.
- Use a properly fitted dust mask or respirator, safety glass or safety shield, heavy gloves and long pants and a long sleeve shirt to protect any exposed skin.
- Use our safety kit # 50097 for complete protection.
- Do not aim the nozzle at any object other than the substrate you are blasting.
- Assure you disconnect the airline and allow the tank to bleed pressure before opening the fill cap.
- Check the condition of the nozzle every 1 hour of blasting and replace once wear is visible or the blast stream becomes ineffective.
- Before each use inspect the tank for any signs of corrosion, assure the rubber hoses are not dry rotted, cracked, split or any other signs of wear or abrasion from use or storage. Do not use the unit until damage components are repaired. Call Eastwood at 800-544-5118 for replacement components
- Assure the dead man valve is operating properly by depressing the valve lever and releasing- assuring it closes over the nozzle under its own spring pressure. If not do not use the dead man valve until the spring or obstruction is repaired.
- Only use fresh Eastwood brand Bicarbonate soda to assure trouble free blasting and quick paint removal
Customer Reviews
-
(Posted on 11/23/09)
Soda Blaster
Review by Vette man -
Price Value Quality Connected to ample compressed air, the unit performs well. It requires regular refills in that the tank only holds 10 libs. It's much smaller and lighter than I expected potentially causing it to fall over.
I broke the pressure gauge on day one when the uniit fell over. Also after a few hours of operations I blew a hole in the output hose. No big deal, a little tape fixed the problem.
In general, it works well and will remove most anything.
