Eastwood Tubing Bender and Forming Pliers Kit

    Item #13621 Brand: Eastwood

    Price
    Value
    Quality
    11 Review(s)

    Details

    When you can bend tubing "kink-free", you avoid wasted time and money! If you try to bend a brake, fuel, transmission or A/C line by hand, you kink the tube...try to align or form the line by hand, you kink the tube. Since you're tired of wasting that time and money, let Eastwood end your frustration with our hand Tubing Bender and Forming Pliers Set.
    • Pliers and Bender both bend 3/16" and 1/4" tubing
    • Bender also works on 5/16" and 3/8" tubing
    • Aligns, bends and adjusts
    • Comfort-grip vinyl handles

    About Eastwood Tubing Bender and Forming Pliers Kit

    Whether fitting new hard lines, or decreasing the bend radius next to an end fitting, this set is indispensable. Bend 3/16" and 1/4" tubing without kinking using the Pliers, or bend 3/16", 1/4", 5/16" and 3/8" tubing up to 180 degrees, kink-free, with the manual tube bender. To make final alignments or adjustment, use the Forming Pliers with a slight turn of the wrist. It's that easy! Imported.


    Contents

    49074 Brake Line Forming Pliers
    12435 Tubing Bender


    Safety

    Always wear eye protection when bending rigid lines.


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 11 total

    per page
    1. 1
    2. 2
    disapointment (Posted on 1/12/14)
    Review by Rick
    Price
    Value
    Quality
    I purchased this tool set based upon the description
    •Pliers and Bender both bend 3/16" and 1/4" tubing
    when I received the tools I noticed that I received a bender that has only 3 grooves, crearly marked 1/4", 5/16", and 3/8". I figured that I had received the wrong tool by mistake. I read the instructions that came with the bender and it says to bend 3/16" and 1/4" tubing in the groove labeled 1/4". This is not what I was expecting at all. On the outside of the box the tools were delivered in it says EASTWOOD DO THE JOB RIGHT. Is this how I do the job right, by using the wrong size tool for the job? The tools are good quality but not as described as far as I'm concerned. I am disapointed. sorry

    ALLWAYS NEED THE RIGHT TOOLS (Posted on 8/13/13)
    Review by LENNY
    Value
    Quality
    Price
    TOOLS OF GOOD QUALITY. WOULD BUY MORE IF IT WAS ALWAYS FREE SHIPPING...
    tubing benders (Posted on 6/25/13)
    Review by LARRY
    Quality
    Price
    Value
    just what the doctor ordered. thanks
    Tool could be improved at minimal cost (Posted on 5/22/13)
    Review by Roy
    Quality
    Price
    Value
    I used the tool to bend a piece of 5/16 steel brake line tubing and found that it was difficult to use without mounting the bender in a vise which it wasn't designed to do. The right angle bend ended up with a crimped section which didn't effect my intended usage but was unexpected. I think the tool could be improved by a rectangular base for use in a vise or with a bench top bolt down capability. I believe that the problems probably would not occur with soft aluminum or copper tubing but bending steel brake lines are the more likely application for this tool.
    Awesome tools (Posted on 4/20/13)
    Review by Michael
    Value
    Quality
    Price
    I bought these for my truck I'm restoring, and they worked out great for the 3/16 brake lines. I haven't tried the 3/8 fuel line yet, but I'm sure they will work like a champ.
    Running new brake lines in project car (Posted on 3/6/13)
    Review by JCinOZ
    Price
    Value
    Quality
    I purchased the tube bender and forming pliers after searching the Internet high and low.
    I needed to run new brake lines on a project car I am building.
    Armed with the bender and pliers I successfully ran the brake lines in one go without a single kink.
    The bender is simple to use and creates perfect curves, while the pliers are great for those tight spaces and final alignment.
    Highly recommended and great products, thanks Eastwood!
    Excellent (Posted on 10/30/10)
    Review by Shane
    Price
    Value
    Quality
    Easy to use , great value for your dollar, I have used VERY high end tools when working on aircraft lines and these tools provide a comparable ease of use and end product without the cost. Great for brake lines.
    Excrellent (Posted on 10/30/10)
    Review by Radar
    Price
    Value
    Quality
    Great value and a solid easy to use set of tools. I did a lot of shopping around and these were the most bang for your buck.
    Excellent tools. (Posted on 6/14/10)
    Review by Stuart
    Value
    Quality
    Price
    It is a number of years since I last used pipe/tubing benders. This one, is really easy to use,and bends are formed without kinks or stress in the tubing.
    The pliers work really well,and give you tight bends exactly where you need them.
    All in all,I am pleased with the performance and quality of both tools.
    Excellence (Posted on 2/23/10)
    Review by Dave
    Value
    Quality
    Price
    It is so hard these days to find a quality tool without paying ridiculous prices. This tool puts an end to that. Excellent quality, well thought out design, at a fair price. What more can we ask?
    Thanks Eastwood! You’ve done it again!

    Items 1 to 10 of 11 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register