- Home
- Eastwood Self-Etching Weld-Thru Primer 16oz Aerosol
- Product Reviews
Details
Eastwood's Self-Etching Weld-Thru Primer combines the benefits of a weld-thru and the capabilities of a traditional Self-Etch Primer. This unique formula has organic binders that replace conductive heavy metals such as copper and zinc. These organic binders will burn off during the welding process leaving a corrosion resistant etching primer. This product will reduce spatter and distortion caused by excessive heat that occurs during the welding process. Compatible with MIG, TIG and arc welding. The etching primer will enhance adhesion and durability and is compatible with most top coats.
Eastwood After Weld Metal Prep Quart
Only
$19.99
|
Eastwood Paintable Welding Anti-Spatter 14 oz Aerosol
Only
$9.99
|
Stainless Steel Brush 10"
Only
$6.99
|
See this product in action!
About Eastwood Self-Etching Weld-Thru Primer 16oz Aerosol
Eastwood's Self Etching Weld Thru Primer combines the benefits of a weld-thru and the capabilities of a traditional Self Etch Primer. This unique formula has organic binders that replace conductive heavy metals such as copper and zinc.These organic binders will burn off during the welding process leaving a corrosion resistant etching primer. This product will reduce spatter and distortion caused by excessive heat that occurs during the welding process.Compatible with MIG, TIG and Arc welding. The etching primer will enhance adhesion and durability and is compatible with most top coats.
160 oz Net Weight ,Gray in color
Clean surface with Eastwood's PRE, prior to applying primer.Apply 2 medium wet coats, allowing 5 minutes flash time between coats.Allow to cure at least 20 minutes prior to welding.
Always consult MSDS for specific safety and hazard warnings.Always wear eye, skin and respiratory protection when painting.Always paint in a well ventilated area away from an open flame.
Customer Reviews
6 Item(s)
per page
-
Won't buy more.
(Posted on 4/16/13)
Review by Steve -
I am a welder/fabricator by trade, Makes welding 20 ga difficult, even with .023 wire. Better to coat and then clean to bare metal at the precise weld locations.Price Value Quality -
WOW
(Posted on 3/8/13)
Review by Big Nick -
I do a lot of restoration work on old Jeeps and use this paint exclusivly for protecting my work on the bayer metal even if I dont weld it. I buy it by the case.Value Quality Price -
easy to use
(Posted on 2/15/13)
Review by Tom-AZ -
Works 100% better then the copper base one they sold before...this one is high quality and works and doesn't clog up at the nozzlePrice Value Quality -
Not worth it
(Posted on 2/12/13)
Review by DadsBlueFord -
Horrible as weld-thru. Poor arc and lots of spatter, hit-and-miss whether it welds through or not. May work better with thicker metal, but with lower settings for sheet metal its awful.Value Quality Price -
works Good
(Posted on 9/30/12)
Review by Macon MR7 -
Work good as being weld thru. Way better than the local paint store brands and when on sale its priced better also.Price Value Quality -
Good product
(Posted on 7/7/12)
Review by TulsaFred -
Seems to work well. It doesn't diminish the arc when Mig welding. I'll purchase again. Which is was 7 dollars or so, like most quality spray paints (rustoleum, etc.).Quality Price Value
6 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|