Metal Blackening Kit Low-VOC
About Metal Blackening Kit Low-VOC
Auto makers have long used black oxide as an attractive coating for hardware. This economical black semi-gloss finish is often used on latches, hardware, brackets and many other automotive parts. Now you can reproduce the OEM look of black oxide at home! Not a paint or dye, Eastwood's Metal Blackening System provides a true OEM-type coating on any iron or steel part. It's safe and simple! Each piece takes only minutes to transform. The kit contains every thing you need: one pint of blackening concentrate, one aerosol Satin Diamond Clear, one process bottle, gloves, goggles, and detailed instructions.
Metal Blackening Solution Low VOC PRE Diamond Clear Large mouth canister Disposable gloves Safety Goggles Instructions
With use the blackening solution loses its strength and eventually, needs to be replaced with replacement Blackening Solution Concentrate (10113ZB).
Use in a well ventilated area. Read and understand all instructions. Always wear eye, skin and respiratory protection when using. Consult MSDS for specific safety warnings.
Made in the USA. 30 Day Eastwood Warranty. NSN# - None
This system is appropriate for applying a non-dimensional black oxide finish to steel and iron. This system is NOT for use on aluminum, brass, copper, or stainless steel. Steel and iron parts to be blackened need to be thoroughly cleaned by removing all grease and other coatings down to bare metal. Cleaning with a solvent like Low VOC PRE (11949Z), and chemically cleaning with Fast Etch gallon, is recommended to assure than an even blackened coating is achieved. Rinse coated parts in water, and force dry then spray with Diamond Clear Satin for Bare Metal.
(Posted on 8/12/2012)
Review by Gary-oke
Price Value Quality
(Posted on 4/5/2012)
Review by Greg P
Quality Price Value
Quick and Easy one step process
(Posted on 10/22/2011)
Review by Tom Mackie Racing
Value Quality Price
Read the entire review and how to article at
Tom Mackie Racing