Knurled Drive Roller (MIG 135)

    Item #13790 Brand: Eastwood

    Quality
    Price
    Value
    2 Review(s)

    Details

    This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023" (0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm) flux cored wire.

    About Knurled Drive Roller (MIG 135)

    This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023"(0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm)flux cored wire.


    Contents

    Includes: 1 Knurled Drive roller for the MIG135.


    FAQ's

    Easily installs by loosening the set screw in the original drive roller,sliding it off the drive shaft and sliding the knurled roller on, finalized by tightening the set screw.


    Safety

    Make sure unit is turned off and unplugged before attempting to install this drive roller.


    Customer Reviews

    2 Item(s)

    per page
    Wrong Design (Posted on 6/4/12)
    Review by Franco
    Price
    Value
    Quality
    Same problem as arojaz. Saw a video of Mig135 from 2009 (welder was blue), and this roller is designed for the older model. The current Mig135 has a keyway in the drive shaft. Not worth sending back - I'll try to modify it.
    Knurled Drive Roller (MIG 135) (Posted on 5/17/12)
    Review by arojaz
    Price
    Value
    Quality
    I received my Knurled Drive Roller and it does not have a set screw. It says in the description to use your original but my original doesn't have one either. What it has is a notched key stock. And the Knurled Drive Roller has no notch so it just spins with no set screw. Just a paper wait for me. :(

    2 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register