Knurled Drive Roller (MIG 135) Eastwood

Knurled Drive Roller (MIG 135)

Item #13790

Value
Quality
Price

2 Review(s)

Only $6.99

Qty:

Add to Wishlist

Details

This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023" (0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm) flux cored wire.

There are no upsell products available.

About Knurled Drive Roller (MIG 135)

This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023"(0.6mm) solid wire and one knurled side for 0.030" (0.8mm) to 0.035" (0.9mm)flux cored wire.

Includes: 1 Knurled Drive roller for the MIG135.

Easily installs by loosening the set screw in the original drive roller,sliding it off the drive shaft and sliding the knurled roller on, finalized by tightening the set screw.

Make sure unit is turned off and unplugged before attempting to install this drive roller.

Customer Reviews

Wrong Design (Posted on 6/4/12) Review by Franco

Price
Value
Quality

Same problem as arojaz. Saw a video of Mig135 from 2009 (welder was blue), and this roller is designed for the older model. The current Mig135 has a keyway in the drive shaft. Not worth sending back - I'll try to modify it.

Knurled Drive Roller (MIG 135) (Posted on 5/17/12) Review by arojaz

Price
Value
Quality

I received my Knurled Drive Roller and it does not have a set screw. It says in the description to use your original but my original doesn't have one either. What it has is a notched key stock. And the Knurled Drive Roller has no notch so it just spins with no set screw. Just a paper wait for me. :(