Details
Air Filter/Regulator - Here's an inexpensive filter/regulator suitable for many painting and air tool operations. 0-120 psi, 30 cfm, 5 micron particulate filter. Semi automatic drain with manual override. Max inlet pressure 230 psi. Temp range 40-120 degrees F. For a replacement filter order (13765). One year
There are no upsell products available.
About RTI Regulator/Filter 1/4 NPT, 0-120 PSI
Air Filter/Regulator - Here's an inexpensive filter/regulator suitable for many painting and air tool operations. 0-120 psi, 30 cfm, 5 micron particulate filter. Semi automatic drain with manual override. Max inlet pressure 230 psi. Temp range 40-120 degrees F. For a replacement filter order (13765). One year
Customer Reviews
1 Item(s)
per page
-
plastic threads
(Posted on 6/23/12)
Review by jtotheace -
I installed a new compressor with all new fittings when I installed this regulator. I had to change the orientation and thats when I noticed the plastic threads. The picture above shows metal threads. After the install I checked for leaks with soapy water and of course the regulator was leaking. I tried to redo the connection and when I took the fitting out the plastic threads started falling apart. It continues to leak slowly, so I tried to tighten the connection a bit more and then the plastic case started cracking.Price Value Quality
Flash forward about 2 weeks and now the gauge is starting to stick. I have to tap it to get it to move. The gauge will not go over 50psi. Now I am back in the market for a regulator and filter.
1 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|