Cylindrical Wire Brush - 5 pack

    Item #13902 Brand: Eastwood

    Quality
    Price
    Value
    13 Review(s)

    Details

    5 Cylindrical Wire Brushes work with your drill to scrape away rust, paint and more with just a pull of the trigger Use these 5 Cylindrical Wire Brushes in your corded or cordless drill to remove rust, paint and other coatings.
    • Clean tubes, pipes, and more
    • Brush section is 2" in diameter, 4" long
    • 6" long overall

    About Cylindrical Wire Brush - 5 pack

    5 wire brushes are designed to speed-up the rust and paint removal process on large surfaces, whether flat, contoured or hollow. Use for cleaning tubes, gratings, sleeves and cylinders.


    Contents

    5 Cylindrical Wire Brushes


    Safety

    Do not operate your drill faster than 3,000 RPM. Wear safety glasses while using.


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 13 total

    per page
    1. 1
    2. 2
    Fair Product- could be better (Posted on 3/27/14)
    Review by James
    Quality
    Price
    Value
    Bought these to help strip down a rear axle beam. On a flat surface these worked well, but trying to fit into a tight spot proved to be a challenge. The brushes came loose in the drill and fell out. Because of the twist in the wire would only work in one direction or the wires could come loose. Would recommend the set include different sizes to work in smaller spaces.
    Eastwood Quality (Posted on 3/12/14)
    Review by Tom
    Quality
    Price
    Value
    A couple bucks more and you get brushes that last for many uses each. Love them!
    very disappointed with this product (Posted on 11/9/13)
    Review by FRANK
    Quality
    Price
    Value
    i had much higher expectations of this product the arbor for one is made of very cheap metal therefore when you put any kind of pressure on the brush the drill chuck just can't grab the arbor because the metal is way to soft,also you can't bend these brushes at all to get them in tight places i went through three of them in no time and just stopped using them as i felt they are a waste of money maybe i'll find something a little easier to use the remaining two brushes on,they are just not intented for tight spots at all i'm sure eastwood can come up with a better product then this .....
    cylindrical wire brush 5 pack (Posted on 10/28/13)
    Review by kenneth
    Price
    Value
    Quality
    Cleaned the frame of my 08 chevy silverado
    Did a excellent job, removed any rust I had
    Like nothing. Very nice and easy to use.
    Holds up good
    Worth the money... (Posted on 9/20/13)
    Review by Doug
    Price
    Value
    Quality
    I bought these to strip a frame on a 68 Bronco that I had lifted the body above. I bought two sets expecting to go through all 10. I was surprised when I only went through four of them! I ran them with my 18v Dewalt drill, a little heavy to hold, but it has good battery life. The brushes did an excellent job cleaning 45 yrs of dirt, rust, and scale. I did have some wire breakage, so standard safety equipment is mandatory.
    well worth the money (Posted on 7/12/13)
    Review by Jeremy
    Quality
    Price
    Value
    I bought the these brushes to take the rust off of parts that I'm swapping into my 93 fox body mustang... they work better than I had hoped they hold up to the heavy use I need them for and have performed better than all the other methods I've tried...in my opinion the only way too do a better job of removing paint and rust is a media blaster... I highly recommend these for a diy person on a budget
    Well worth the money (Posted on 6/10/13)
    Review by Robert
    Price
    Value
    Quality
    I purchased the new Cylindrical Wire Brushes and have been very pleased with the results. After receiving the Brushes I tried them on some 1/4" mild Steel Bar Stock before I did some welding. It removed the rust with ease. The Brushes did what I had hope they would do. It's a solid product in my opinion.
    Don't buy. (Posted on 6/2/13)
    Review by Mark
    Value
    Quality
    Price
    Wore two out in ten minutes stripping paint and rust from suspension.

    Wires are not bound tight enough and come loose. Wear your safety glasses because the wires will be flying towards you.
    Works well but wears down quickly (Posted on 4/10/13)
    Review by Mike
    Price
    Value
    Quality
    I bought this set of brushes to clean inside the rear frame rails of my '65 Mustang. 40 years of gunk and rust were whisked away quickly and easily. The brushes worked great BUT once they conform to a small space (slightly smaller diameter than a brush) , they stay at the smaller diameter. They do not spring back. Once they loose the original diameter you will need to move on to a new brush if brush size is important for your project. It would be nice if they were made out of a springier material. I would buy these again as they do work great.
    Great Product (Posted on 2/17/13)
    Review by 66vwbug
    Price
    Value
    Quality
    I am very happy with these brushes. They remove paint with little effort and do a great job on rust. they work is tight spaces and odd shapes. They do not kick back as bad as some brushes and by reversing the drill the kickback can be controlled. They seem to hold up very good. I

    Items 1 to 10 of 13 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register