Cylindrical Wire Brush - 5 pack

    Item #13902 Brand: Eastwood

    Value
    Quality
    Price
    16 Review(s)

    Details

    5 Cylindrical Wire Brushes work with your drill to scrape away rust, paint and more with just a pull of the trigger Use these 5 Cylindrical Wire Brushes in your corded or cordless drill to remove rust, paint and other coatings.
    • Clean tubes, pipes, and more
    • Brush section is 2" in diameter, 4" long
    • 6" long overall

    About Cylindrical Wire Brush - 5 pack

    5 wire brushes are designed to speed-up the rust and paint removal process on large surfaces, whether flat, contoured or hollow. Use for cleaning tubes, gratings, sleeves and cylinders.


    Contents

    5 Cylindrical Wire Brushes


    Safety

    Do not operate your drill faster than 3,000 RPM. Wear safety glasses while using.


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 16 total

    per page
    1. 1
    2. 2
    this is a good product (Posted on 6/22/14)
    Review by jay
    Price
    Value
    Quality
    these need to come in a variety of how coarse they are....less coarse would be nice to have ....
    good product (Posted on 5/8/14)
    Review by Jim
    Quality
    Price
    Value
    The wire brushes did great. I just needed to ensure that I used the brushes in a non-cordless drill. I need to ensure that I did not put too much pressure on the brush as it would bend.
    light duty only (Posted on 4/9/14)
    Review by KEITH
    Price
    Value
    Quality
    As soon as you put a little pressure on the brush the shaft bends rendering it pretty much useless. Anything more than light duty is beyond this products use.
    Fair Product- could be better (Posted on 3/27/14)
    Review by James
    Quality
    Price
    Value
    Bought these to help strip down a rear axle beam. On a flat surface these worked well, but trying to fit into a tight spot proved to be a challenge. The brushes came loose in the drill and fell out. Because of the twist in the wire would only work in one direction or the wires could come loose. Would recommend the set include different sizes to work in smaller spaces.
    Eastwood Quality (Posted on 3/12/14)
    Review by Tom
    Quality
    Price
    Value
    A couple bucks more and you get brushes that last for many uses each. Love them!
    very disappointed with this product (Posted on 11/9/13)
    Review by FRANK
    Quality
    Price
    Value
    i had much higher expectations of this product the arbor for one is made of very cheap metal therefore when you put any kind of pressure on the brush the drill chuck just can't grab the arbor because the metal is way to soft,also you can't bend these brushes at all to get them in tight places i went through three of them in no time and just stopped using them as i felt they are a waste of money maybe i'll find something a little easier to use the remaining two brushes on,they are just not intented for tight spots at all i'm sure eastwood can come up with a better product then this .....
    cylindrical wire brush 5 pack (Posted on 10/28/13)
    Review by kenneth
    Price
    Value
    Quality
    Cleaned the frame of my 08 chevy silverado
    Did a excellent job, removed any rust I had
    Like nothing. Very nice and easy to use.
    Holds up good
    Worth the money... (Posted on 9/20/13)
    Review by Doug
    Price
    Value
    Quality
    I bought these to strip a frame on a 68 Bronco that I had lifted the body above. I bought two sets expecting to go through all 10. I was surprised when I only went through four of them! I ran them with my 18v Dewalt drill, a little heavy to hold, but it has good battery life. The brushes did an excellent job cleaning 45 yrs of dirt, rust, and scale. I did have some wire breakage, so standard safety equipment is mandatory.
    well worth the money (Posted on 7/12/13)
    Review by Jeremy
    Quality
    Price
    Value
    I bought the these brushes to take the rust off of parts that I'm swapping into my 93 fox body mustang... they work better than I had hoped they hold up to the heavy use I need them for and have performed better than all the other methods I've tried...in my opinion the only way too do a better job of removing paint and rust is a media blaster... I highly recommend these for a diy person on a budget
    Well worth the money (Posted on 6/10/13)
    Review by Robert
    Price
    Value
    Quality
    I purchased the new Cylindrical Wire Brushes and have been very pleased with the results. After receiving the Brushes I tried them on some 1/4" mild Steel Bar Stock before I did some welding. It removed the rust with ease. The Brushes did what I had hope they would do. It's a solid product in my opinion.

    Items 1 to 10 of 16 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register