Cylindrical Wire Brush - 5 pack

    Item #13902 Brand: Eastwood

    Details

    5 Cylindrical Wire Brushes work with your drill to scrape away rust, paint and more with just a pull of the trigger Use these 5 Cylindrical Wire Brushes in your corded or cordless drill to remove rust, paint and other coatings.
    • Clean tubes, pipes, and more
    • Brush section is 2" in diameter, 4" long
    • 6" long overall

    About Cylindrical Wire Brush - 5 pack

    5 wire brushes are designed to speed-up the rust and paint removal process on large surfaces, whether flat, contoured or hollow. Use for cleaning tubes, gratings, sleeves and cylinders.


    Contents

    5 Cylindrical Wire Brushes


    Safety

    Do not operate your drill faster than 3,000 RPM. Wear safety glasses while using.


    Customers also viewed:

    Customer Reviews

    Items 11 to 16 of 16 total

    per page
    1. 1
    2. 2
    Don't buy. (Posted on 6/2/2013)
    Review by Mark
    Value
    Quality
    Price
    Wore two out in ten minutes stripping paint and rust from suspension.

    Wires are not bound tight enough and come loose. Wear your safety glasses because the wires will be flying towards you.
    Works well but wears down quickly (Posted on 4/10/2013)
    Review by Mike
    Price
    Value
    Quality
    I bought this set of brushes to clean inside the rear frame rails of my '65 Mustang. 40 years of gunk and rust were whisked away quickly and easily. The brushes worked great BUT once they conform to a small space (slightly smaller diameter than a brush) , they stay at the smaller diameter. They do not spring back. Once they loose the original diameter you will need to move on to a new brush if brush size is important for your project. It would be nice if they were made out of a springier material. I would buy these again as they do work great.
    Great Product (Posted on 2/17/2013)
    Review by 66vwbug
    Price
    Value
    Quality
    I am very happy with these brushes. They remove paint with little effort and do a great job on rust. they work is tight spaces and odd shapes. They do not kick back as bad as some brushes and by reversing the drill the kickback can be controlled. They seem to hold up very good. I
    Dissapointed with this product (Posted on 11/5/2012)
    Review by Helper
    Quality
    Price
    Value
    The wires on the brush quickly spun off leaving strands all over the place. The core bent easily and created a hazard. Overall, other tools such as wire wheels and sanding discs are better. The concept is great as the length and size will get to areas no other tool can reach.
    Overated (Posted on 6/10/2012)
    Review by Raymond
    Price
    Value
    Quality
    went thru 5 in under 30 minutes, ok for light surface rust in open areas but tight spots will wipe it out in nothing flat. Not at all what I expected from Eastwood as I use their products Daily. Ok for the money but had bigger plans for them...
    wire brush 5 pack (Posted on 5/13/2012)
    Review by Macon Mr7
    Price
    Value
    Quality
    They work good fresh . I used them to clean the inside of my cars frame rails. But as they bend over its slow going and the little wires break off and you find them everywhere. I must say they did the job.

    Items 11 to 16 of 16 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register