Contour Lightweight Body Filler .8 gal (Eastwood)

Eastwood Contour Lightweight Body Filler .8 gal

Item #13519 ZP Brand: Eastwood

Quality
Price
Value

4 Review(s)

Details

Contour™ Lightweight Body Filler puts down a smooth, pinhole-free surface Non-clogging, lightweight body filler is formulated for smooth spreading and easy sanding. Provides superior adhesion to galvanized steel, aluminum and all metals, as well as wood, concrete and fiberglass.

Pinhole-free formula
Maximum adhesion
Includes 2-oz. hardener

About Eastwood Contour Lightweight Body Filler .8 gal

Creamy texture has excellent workability and virtually eliminates all pinholes. May be top-coated with your own glazing putty, or epoxy or urethane primer.

1 can of Lightweight Body Filler, 0.8-gallon
1 tube of Cream Hardener, 2 ozs.

13521ZP Contour™ Glazing Putty
13919 Eastwood Filler Spreaders
31273 Eastwood Filler Mixing Board
10041Z PRE Painting Prep
31160 Dura-Block Sanding Blocks
21538 Larry Lyles "Basic Body Repair" DVD
43579 Dual-Action Random-Orbit Sander
43120 Eastwood Fender Stand

Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/4" depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-grit to achieve desired contour. Final finish with finer abrasives. If necessary, apply Eastwood’s 13521ZP Contour™ Glazing Putty for final finishing. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.

CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.

Always wear eye, skin and respiratory protection when using this product. Always apply in a well-ventilated area. Consult MSDS and product label for specific safety warnings.

Customer Reviews

you guys asked for a rerview (Posted on 3/3/13) Review by goufos

Price
Value
Quality

heres my review about eastwood! if you guys keep giving me clearance items and free shipping i will always shop here! the free shipping works great for me! plus those interactive live sessions you guys run are kool to! p.s. i bought a concour gun- its a real nice gun for the money!

Not so good (Posted on 12/9/12) Review by SteveO

Quality
Price
Value

The price is pretty good but like that old saying' "you get what you pay for.."
When the can is first opened it is great, the first scoops for the first couple of mixes are good. After the can is opened, all bets are off! I think that the air just destroys the filler left in the can.

I sealed the can after I scooped it onto my board every time but the filler on the sides of the can and on the surface would turn brown and hard. I would try and scoop around these chunks but it would still get in the mix. I would pick the pieces out but by the time I got the majority of them out my filler was setting up.

The first can was thrown away with about half of the filler unused, stupid me bought another can thinking it may have been a bad first can, wrong. They both were junk! My two cans would become unusable because of hard chunks after just a few weeks!

I contacted customer service and they would just keep telling me that it has a shelf life of 6 months after opened. They just don't seem to care.

Don't waste your money unless you will be using it all up in a week or two. Maybe that's why it is only has .8 of a gallon in the can!

Problems with the resin (Posted on 11/23/12) Review by Mike

Quality
Price
Value

I've used about 4 gallons so far and have had problems with the resin hardening after storeing unused filler for a short time. It then becomes very hard to use and I end up tossing it. Never had this happen with other brands. I like this filler otherwise.

Good Product (Posted on 4/25/12) Review by phoenix

Price
Value
Quality

Very smooth and like butter. Sands very easily.
If left more than 8 hours you must seal can..
If left with lid not sealed tightly residue of material on sides of can get hard and can get into filler and contaminate resulting in small bits in your filler and on body panel. Other than this problem it's a 8 out of 10 ...