Eastwood Contour Glazing Putty 24 oz Tube

Item #13521 ZP Brand: Eastwood

Price
Value
Quality

2 Review(s)

Only $24.99

Qty:

Add to Wishlist

Details

Fill pinholes and sand scratches with our Polyester Glazing Putty...even on large areas Before painting, use this glazing putty to fill pinholes and sand other minor imperfections that can ruin the look of your final finish. Use over sanded substrates, steel and galvanized steel.

Fills pinholes
Sands scratches and imperfections
Can be applied to large areas without distortion
Mix with other body fillers

Body Filler Quick Mix Board

Only $18.99

1 Review(s) | Add Your Review

Dura-Block 7 Piece Sanding Blocks - DuraBlock

Only $59.99

16 Review(s) | Add Your Review

500-lb.-capacity Work Stand

Only $24.99

21 Review(s) | Add Your Review

See this product in action!

About Eastwood Contour Glazing Putty 24 oz Tube

Easily spreads very thin and can be sanded to an ultra-thin feather edge. Mix with body fillers to improve their spreading and sanding ability. Unlike other putties, our glazing putty can be spread over larger areas and fill without distorting contours. May be top-coated with epoxy or urethane primer. Includes 2-oz. cream hardener.

Polyester Glazing Putty, 24 ozs.
1 tube of Cream Hardener, 2 ozs.

13919 Eastwood Filler Spreaders
31273 Eastwood Filler Mixing Board
10041Z PRE Painting Prep
31160 Dura-Block Sanding Blocks
21538 Larry Lyles "Basic Body Repair" DVD
43579 Dual-Action Random-Orbit Sander
43120 Eastwood Fender Stand

Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/16" depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-180-grit to achieve desired contour. Final finish with finer abrasives. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.

CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.

Always wear eye, skin and respiratory protection when using this product. Always apply in a well-ventilated area. Consult MSDS and product label for specific safety warnings.

Customer Reviews

Good pruduct (Posted on 3/27/13) Review by OMG

Price
Value
Quality

I would recommend this product. I agree that the sanding does clog the first piece of paper but then sands right out with a fresh peice. I would say don’t be shy with the hardner on this one. I found less hardner contributes to the sanding issues. What I can say is that the shelf life on this product surpasses other products on the market. I’ve used other products that gel in the tube after it has been opened or right off the shelf from the local body suppliers. At that point it useless. I’ve use 4 tubes of this product so far and it has held up well no gelling at and been able to utilize the entire tube each time. Personally I think this is a good product and I’m about to order some right now!

Plugs Paper/Hard to sand (Posted on 1/1/13) Review by DonC

Quality
Price
Value

I have used other glazing putties and have never had a problem with the paper getting plugged and they have sanded easily. The product quickly plugs up the paper and is quite difficult to sand. I would not recommend this product if you're looking for an easy sand glazing product.