Eastwood Contour Polyester Primer Surfacer Qt

    Item #13522ZP

    Quality
    Price
    Value
    6 Review(s)

    Details

    Contour™ Sprayable High-Build Primer/Surfacer serves as an excellent base for any paint system 2-component polyester primer/surfacer has excellent filling characteristics and superior adhesion to steel, aluminum, fiberglass, SMC, OE finishes, self-etching primers and body fillers.
    • High build with excellent filling capabilities
    • Easy to sand with no shrinkage
    • Includes hardener

    About Eastwood Contour Polyester Primer Surfacer Qt

    Eastwood’s Sprayable Polyester Primer-Surfacer is a 2-component high build sprayable body filler that serves as an excellent base for any paint system. It has excellent filling characteristics and superior adhesion to steel, aluminum, fiberglass, SMC, OE Finishes, self Etching Primers and body fillers. Its high solids and high build formula allows you to achieve a laser straight surface prior to painting. Includes catalyst.


    Contents

    Primer: 32 Fl Ounces/ 946mL Catalyst: 2 oz/ 60g


    Accessories

    12416z Eastwood Guide Coat 10041Z PRE Painting Prep 13919 Eastwood Filler Spreaders 31273 Eastwood Filler Mixing Board 31160 Dura Block Sanding Boards 21538 Larry Lyles Body Work DVD 43579 DA Orbiting Sander 43120 Eastwood Work-Fender Stand


    Application

    Apply two or three medium wet coats as needed. Heavy wet coats should NOT be applied. Dry spray may be removed before recoating. Allow 90 minutes dry time before sanding at 68 degreesF. Finish with 220-grit, followed by 320-400-grit.

    CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.


    Safety

    Always wear eye, skin and resp[oratory protection when using this product always apply in a well ventilated area. consult MSDS and product label for specific safety warnings


    Warranty

    Made in Canada to Eastwood's strict specifications and quality standards


    Application

    Surface must be clean and free of wax, grease and debris. Body Filler & Putty: Rough sand w/80 grit, then 180-220, featheredge w/320 Painted Surfaces: Sand and featheredge using 80, 180 ,220 and finish w/320 Gun requirements: 1.8mm to 2.5mm Fluid Tip Size, 35 to 45 PSI Apply 2-3 medium wet coats. 90 min dry time @ 68°F finish with 220 and final with 320-400 grit.


    Customers also viewed:

    Customer Reviews

    6 Item(s)

    per page
    Excellent (Posted on 11/4/13)
    Review by Mike
    Quality
    Price
    Value
    Another great Eastwood product! Very easy to spray and lays good when thinned just a little. Easy to sand. Used on 100% of my wifes 57 chevy body, to make it as straight as possible. Highly recommended.
    Good Product (Posted on 4/23/13)
    Review by Woods
    Value
    Quality
    Price
    In low humidity areas of the SW need to thin with acetone and work fast. The mixing instruction added sticker is good. The first time I mixed at the 5% and the second 4% I liked the 4% better in our dry air.
    ok (Posted on 4/16/13)
    Review by Woods
    Price
    Value
    Quality
    Mixing instruction on the can are hard to understand the stick they added to the top was better.
    ok (Posted on 4/16/13)
    Review by Woods
    Price
    Value
    Quality
    Mixing instruction on the can are hard to understand the stick they added to the top was better.
    I HAVE HAD GREAT RESULTS WITH THIS PRODUCT (Posted on 10/7/12)
    Review by JAMCAR223
    Quality
    Price
    Value
    SPRAYS SMOOTH, BUT I DID HAVE TO THIN IT A LITTLE USING ACETONE. NICE HIGH BUILD QUALITIES. SANDS EASILY. I WISH IT WAS $19.95
    Great Product (Posted on 6/25/12)
    Review by Dennis
    Price
    Value
    Quality
    Product sprayed out nice and smooth. Sanded very easily, didn't clog paper like some polyester spray fillers.

    6 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register