Aerosol Injected Lubricator 11 oz Net 12 Pack
- You get 12 cans of Aerosol-Injected Lubricant
- Use on air tools
- Speedometer cables
- Locks and mechanisms
- Machinery and shop equipment
- Also use for fogging/engine storage
About Aerosol Injected Lubricator 11 oz Net 12 Pack
Eastwood's aerosol Injected lubricator directs a focused blast of lubricant that penetrates deep into hard to reach places. This unique injection system allows you configure the application tips to your specific job. Ideal for lubricating air tools, lock mechanisms, speedometer cables, engine fogging, small engine storage and so much more. The more you use it, the more you'll put it to use.
11oz net weight per can Contains 12 cans of 13445z
12846Z Aerosol Injected Cleaner 10041z PRE Painting Prep 43098L Nitride Gloves 43090 Safety Goggles 11456 Respirator 13000 Dust mask 11456 Respirator
Q: Does the long extension nozzle come off? A: Yes, point the can away from you and with a slight twisting motion it will remove. It has a handy clip so you can attach it to the can. Q: Can I remove the bottom nozzle? A: No, there is no reason to remove it. It cannot be used on any other aerosol, nor has it been tested with any other aerosols. Q: Why didn't anyone else think of this? A: We're Eastwood Johnny, its what we do
POINT AWAY FROM FACE! Always wear eye, skin and respiratory protection when using this product. Read all label instructions before use. Personal injury and property damage could occur if misused. Use in a well ventilated area away from open flame. Contents extremely flammable and under pressure Keep away from children. Harmful if swallowed. If swallowed DO NOT induce vomiting, contact physician immediately. VOC Content: MCP Maximum 1.90
made in USA
1. Test fit the injector tip into area to be lubricated. Make sure it fits snugly into place. 2. Put on eye protection and point away from your face 3. Insert nozzle tip into orifice and gently push on the back of the can until proper lubrication is achieved. If fogging an engine, remove spark plugs and insert tip into cylinder and apply lubricant. Replace spark plugs when complete. Always store with the extension tube removed and attached to the can to prevent accidental discharge.