Eastwood MIG175 and Versa Cut Plasma Cutter Kit

    Item #13946 Brand: Eastwood

    Price
    Value
    Quality
    9 Review(s)

    Details

    Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa-Cut Plasma Cutter! Click on the individual links below for all the specs, but you must click the "Add To Cart" button above to get the special savings over individual prices!

    Eastwood's 220v MIG 175 Welder uses its 175-amp output to handle almost any welding job, and comes with a spool gun for aluminum, stainless and steel.
    • MIG welder welds mild and stainless steel, 24-ga. to 5/16"
    • Welds aluminum, 14-ga. to 1/4"
    • 30-175-amp welding range
    The Eastwood Versa Cut Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8" thick.
    • 110v or 220v AC input with inverter technology
    • 20' torch cable; 10' ground cable with clamp
    • Rated 40-amp output

    About Eastwood MIG175 and Versa Cut Plasma Cutter Kit

    This welding kit for metalwork includes 1 Eastwood MIG175 Welder (12012) and 1 Eastwood Versa Cut Plasma Cutter (12740).


    Contents

    MIG 175 Welder
    Versa Cut Plasma Cutter


    Accessories

    See consumables list for each individual unit.


    Safety

    See safety info for each individual unit.


    Customers also viewed:

    Customer Reviews

    9 Item(s)

    per page
    Excellent service (Posted on 4/24/14)
    Review by Bob
    Quality
    Price
    Value
    Just received the MIG 175 and Versa Cut Plasma. Prompt shipping. Had the MIG evaluated by CWI/Tech School Instructor. His opinion - "I want one!" Excellent bead and penetration quality with 1/8 and .375 thick steel. Instructor really liked the variable setting capabilities of the MIG. He felt it was a well made machine that should serve in a small shop or hobby environment. Aluminum spool gun not evaluated. Box appeared to have been dropped in shipment and handle on the spool guy was cracked. Contacted Eastwood and they promptly sent a replacement. Test cuts with the Plasma cutter were very easy. Handled 1/8 th steel easily, .375 well. Appears more air pressure is the secret to getting professional appearing cuts. Learning curve? About 15 seconds!
    plasma amd mig 175 (Posted on 4/2/14)
    Review by Angel
    Price
    Value
    Quality
    been welding for many years and this package is worth getting easy to use, nice weld
    Extremely satisfied with both machines and with the customer service from Eastwood (Posted on 12/24/13)
    Review by Gary
    Value
    Quality
    Price
    I ordered the special on the Versa Cut Plasma Cutter and the 175 MIG Welder. Both were shipped quickly and safely. I had some questions about the Plasma Cutter nozzle, my questions were quickly handled by Customer Service. I have since used both the cutter and the welder and am very satisfied with each.
    Happy and content with purchase (Posted on 9/24/13)
    Review by Frank
    Quality
    Price
    Value
    Great price, fast delivery, easy to set up, fantastic warranty, cuts and welds as advertised what’s there to complain about? Where else are you going to go to get such a bargain? Nowhere but Eastwood, that’s where. I’m a happy camper with my purchase. I’m aware a few people have had issues and that was a concern of mine but I also knew that Eastwood is a stand up company and if I had issues they would make them right. They have been a very reliable company to me throughout the years and I trust them. I’ll be back that’s for sure. Thanks Eastwood!
    Very Happy with both machines (Posted on 12/12/12)
    Review by Gary
    Quality
    Price
    Value
    I have been a Weld Technician for 15 years. I have worked with only indstrial welders. I was a little sceptical of the welder at first but now that I have welded 20 ga & 1/4" I am impressed with the welder as well as the plasma cutter. When I first seen the Plasma cutter I the size made me think this was a mistake. But when I used it to cut 2 1/4" peices of steel welded together off a boat 2 trailer I became very happy with both machines.
    Welder is great Plasma cutter is bad (Posted on 9/29/12)
    Review by Greg
    Price
    Value
    Quality
    I had to replace the first welder and cutter due to both units were damaged before placed in packaging. Second welder works great. Had to return the second cutter as it was a dead unit. The third cutter arrived and worked great for about a dozen saddle cuts on some pipe for fencing and stopped creating an arc. Tech support was great along with customer service until the thrird cutter went out. They stated due to warranty policy they could only credit me for the cutter as they could not sent a forth unit out on warranty. I was willing to work this out with patience but Eastwood dropped the ball on this on. They said if I still wanted the cutter I could purchase another one at the regular price that would be approx $50 more that with the combo.
    I have done business with EASTWOOD for years and am surprised at this policy. I feel violated.
    Welder is OK, Plasma cutter not working properly after 2 cuts (Posted on 8/17/12)
    Review by Dave
    Price
    Value
    Quality
    I will not give a complete review until issue is resolved. I sent a email to Tech Support waiting answer. Issue is plasma cutter comes on initially, will not reignite for second cut. All connections are tight and metal is new and clean.Air is ample and only air comes out with no spark. Not sure, but power light stays on even when unit is in off position. Review is for plasma only. welder is good so far. Alot of plastic in construction of both units which reduces cost but makes for lesser quality than metal housings and connections.Get this resolved and I will give a much higher review.
    Very Impressed. (Posted on 3/12/12)
    Review by Nick
    Price
    Value
    Quality
    I have been welding for 40 years, and none of the machines I have used were as user friendly as these. Both worked great right out of the box.
    Both machines easily handle thier rated capacities, then some.
    Good deal!
    plasma/mig (Posted on 3/9/12)
    Review by bigmel
    Price
    Value
    Quality
    bought package after research on the web and reviews. price can't be beat. used the plasma cutter and put the cuting torch away for large jobs, still playing with the settings on the mig but so far looks to be a good one to work with on lighter metals. would recomend to those looking for either or both for diy jobs. warrenty pretty darn nice as well. 3 years GREAT.

    9 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register