Eastwood 1/4 Inch Angle Air Die Grinder

Item #13737 Brand: Eastwood

Quality
Price
Value

5 Review(s)

No additional discounts apply.

Details

Eastwood 1/4" Air Angle Die Grinder gives you easy access and maneuverability in tight spaces Grinding, edge-breaking, deburring, porting, polishing...with this pneumatic die grinder's angled head, you can easily get all this work done even in hard-to-reach spots.

20,000-rpm no-load speed
Built-in regulator controls speed
Grease fitting improves angle gear life
Ball-bearing construction for long life
Needs only 3 cfm at 90 psi

About Eastwood 1/4 Inch Angle Air Die Grinder

You'll find our 1/4" Air Angle Die Grinder to be as high quality as national brands, and a great value! Features ball-bearing construction, safety lever, rear exhaust. Stall-resistant design, with hardened gears and heat-treated components for durability and reliability. 1/4" FNPT air inlet. Final product imported.

1/4" Air Angle Die Grinder
2 Collet Wrenches

Click here for product instructions

Do not exceed 90 psi (6.3 bar) of tool inlet air pressure. Do not force tool or exert side forces on bit while grinding or cutting. Wear approved eye gear at all times when operating the tool. Keep loose clothing, jewelry and long hair away from rotating components. Always make sure the workpiece being ground or cut is securely clamped. Wear appropriate respiratory protection. Always disconnect tool from air supply when changing bits.

One year warranty against manufacturer's defects.

Final product imported.

Customer Reviews

AOK (Posted on 6/7/13) Review by Great Dane

Price
Value
Quality

This Grinder is a great Value. When using this tool I noticed the sound pitch is much lower that previous higher priced makes I have used. Much easier on the ears. I am constantly using this tool while I am rebuilding and repainting my 1969 Harley. This is truly the right tool for the job.
A right angle gear greasing tool should be purchased with this tool so you don't burn out the worm gear. I have been using my chainsaw bar sprocket tool to grease this gear until I purchase the proper grease gun.

awesome deal (Posted on 5/27/13) Review by brian

Quality
Price
Value

great value, nice little die grinder. saw one on the snap on truck at work. exact same only it said blue point on it for 7x the cost. i had to chuckle to myself

Excellent price!!!!!! (Posted on 4/18/13) Review by EDDIE

Value
Quality
Price

"I have been using the grinder with a 2" Roloc using sandpaper disk. Its very powerful and quiet. The quality of the tool is very good. It did a good job of removing deep rust from the metal. I could use it for several minutes before the compressor would need to kick on and catch up. i found at times I would have wait for the pressure to build. My compressor is a 20 gallon 5.5 cfm. if your going to use it constantly you will need a bigger compressor.

Great Product (Posted on 12/15/12) Review by Tire Guy

Quality
Price
Value

I run a small tire and performance shop and this tool has done very well, not too heavy, not too loud, keeps up well with what I do with it. I dont pound on it hard all day long like some do but this works great for me and the price was excellent. Will for sure buy more of these as the business grows.

EXCELLENT (Posted on 9/30/12) Review by Cantu (Houston)